P0797 2018 Chevrolet Silverado Code - Pressure Control Solenoid Valve 3 Stuck On
Quick Answer
The P0797 diagnostic trouble code (DTC) indicates that the Pressure Control Solenoid Valve 3 is stuck on in a 2018 Chevrolet Silverado. Common causes include Faulty pressure control solenoid valve, Wiring or electrical issues, Low transmission fluid level or dirty fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0797 2018 Chevrolet Silverado indicates Pressure Control Solenoid Valve 3 Stuck On.
- Common causes
- Common causes include Faulty pressure control solenoid valve, Wiring or electrical issues, Low transmission fluid level or dirty fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0797 2018 Chevrolet Silverado Description
The P0797 diagnostic trouble code (DTC) indicates that the Pressure Control Solenoid Valve 3 is stuck on in a 2018 Chevrolet Silverado. This valve is a crucial component of the transmission system, responsible for regulating the hydraulic pressure within the transmission. When the solenoid valve is stuck in the "on" position, it can lead to a variety of issues with the transmission's operation.
Common Causes of P0797 2018 Chevrolet Silverado
- Faulty pressure control solenoid valve
- Wiring or electrical issues
- Low transmission fluid level or dirty fluid
- Mechanical issues within the transmission
- Software or programming issues
Symptoms of P0797 2018 Chevrolet Silverado
- Erratic shifting or delayed gear changes
- Harsh or rough shifting
- Transmission slipping
- Reduced fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0797 2018 Chevrolet Silverado
- Begin by diagnosing the specific cause of the issue using a scan tool to read the P0797 code and conducting a visual inspection of the transmission components.
- Inspect the pressure control solenoid valve for proper operation and replace it if necessary.
- Check the wiring and electrical connections related to the solenoid valve for any damage or corrosion, repairing or replacing as needed.
- Perform a transmission fluid flush and filter replacement to ensure clean and adequate fluid levels.
- Clear the DTC from the vehicle's computer memory and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0797 2018 Chevrolet Silverado
The cost of repairing the Pressure Control Solenoid Valve 3 stuck on issue in a 2018 Chevrolet Silverado can vary depending on the specific cause of the problem and the labor rates in your area. On average, the parts cost for a pressure control solenoid valve replacement ranges from $100 to $300, while the labor cost can be between $150 and $300. Overall, the total repair cost for this issue typically falls between $250 and $600. It is recommended to consult with a professional mechanic or auto repair shop for an accurate estimate based on your vehicle's specific needs and location.
Need more information about the P0797 2018 Chevrolet Silverado code?
Need more information on how to fix the P0797 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0797 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0797 2018 Chevrolet Silverado Code
1. What does OBDII code P0797 mean on a 2018 Chevrolet Silverado?
P0797 indicates that Pressure Control Solenoid Valve 3 is stuck in the "on" position, causing transmission issues.
2. What are the symptoms of a P0797 code in a 2018 Chevrolet Silverado?
Symptoms may include harsh or delayed shifting, slipping gears, transmission overheating, or the vehicle going into limp mode.
3. What causes the P0797 code to appear?
Common causes include a faulty pressure control solenoid, dirty or low transmission fluid, wiring issues, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2018 Chevrolet Silverado with a P0797 code?
Driving with this code is not recommended as it can cause further damage to the transmission and impair vehicle performance.
5. How do I fix a P0797 code on my 2018 Chevrolet Silverado?
Repairs may involve replacing the faulty solenoid, flushing and refilling the transmission fluid, or repairing damaged wiring or connectors.
6. How much does it cost to repair a P0797 code in a 2018 Chevrolet Silverado?
The cost can range from $200 to $500 for solenoid replacement, but additional repairs like wiring fixes or fluid changes may increase costs.
7. How can I check if the pressure control solenoid is faulty?
A mechanic can test the solenoid's resistance with a multimeter and inspect it for physical damage or blockage.
8. Can dirty transmission fluid trigger the P0797 code?
Yes, old or contaminated transmission fluid can cause solenoid malfunctions and lead to this code.
9. Will resetting the check engine light clear the P0797 code permanently?
No, clearing the code without addressing the underlying issue will likely result in the code returning.
10. Is a transmission rebuild necessary for a P0797 code?
In most cases, a full rebuild isn’t required. Replacing the solenoid or addressing fluid and electrical issues usually resolves the problem.
Discuss the causes and fixes for P0797 2018 Chevrolet Silverado OBDII Code
Code P0797 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.