P0797 2014 GMC Sierra Code - Pressure Control Solenoid Valve 3 Stuck On
Quick Answer
The P0797 diagnostic trouble code (DTC) in a 2014 GMC Sierra indicates an issue with the Pressure Control Solenoid Valve 3 being stuck on. Common causes include Faulty Pressure Control Solenoid Valve 3, Wiring or connection issues, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0797 2014 GMC Sierra indicates Pressure Control Solenoid Valve 3 Stuck On.
- Common causes
- Common causes include Faulty Pressure Control Solenoid Valve 3, Wiring or connection issues, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0797 2014 GMC Sierra Description
The P0797 diagnostic trouble code (DTC) in a 2014 GMC Sierra indicates an issue with the Pressure Control Solenoid Valve 3 being stuck on. This valve is a crucial component of the transmission system, responsible for controlling the hydraulic pressure within the transmission. When the solenoid valve is stuck in the on position, it can lead to various transmission-related problems, affecting the vehicle's performance and drivability.
Common Causes of P0797 2014 GMC Sierra
- Faulty Pressure Control Solenoid Valve 3
- Wiring or connection issues
- Low transmission fluid levels
- Internal transmission problems
- Electrical problems within the transmission control module
Symptoms of P0797 2014 GMC Sierra
- Erratic shifting behavior
- Harsh or delayed shifting
- Lack of acceleration
- Reduced fuel efficiency
- Transmission slipping or overheating
How to Fix P0797 2014 GMC Sierra
- Perform a thorough diagnostic scan to confirm the P0797 code and identify the exact cause of the issue.
- Inspect the Pressure Control Solenoid Valve 3 and its wiring for any signs of damage or corrosion.
- Check the transmission fluid level and quality, topping up or replacing it if necessary.
- Test the transmission control module for any electrical faults or malfunctions.
- Replace the faulty Pressure Control Solenoid Valve 3 if needed and clear the DTC to reset the system.
Cost to Fix P0797 2014 GMC Sierra
The cost of repairing a Pressure Control Solenoid Valve 3 stuck on issue in a 2014 GMC Sierra can vary depending on the exact cause of the problem and the cost of parts and labor in your area. On average, the parts for this repair can range from $100 to $300, while the labor costs can be anywhere from $150 to $400. Overall, you can expect to pay between $250 and $700 for this repair at an auto repair shop. Keep in mind that these are rough estimates, and actual costs may vary based on your location and the specific circumstances of your vehicle. It's best to consult with a professional mechanic for a more accurate cost estimate.
Need more information about the P0797 2014 GMC Sierra code?
Need more information on how to fix the P0797 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0797 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0797 2014 GMC Sierra Code
1. What does OBDII code P0797 mean on a 2014 GMC Sierra?
P0797 indicates that the pressure control solenoid valve 3 in the transmission is stuck in the "on" position, which can affect gear shifting and transmission performance.
2. What are common symptoms of a P0797 code in a 2014 GMC Sierra?
Symptoms may include harsh or delayed shifting, being stuck in one gear, poor fuel efficiency, or the transmission slipping.
3. What causes the P0797 code in a 2014 GMC Sierra?
Common causes include a faulty pressure control solenoid, transmission fluid that is dirty or low, wiring issues, or internal transmission problems.
4. Can I drive my 2014 GMC Sierra with a P0797 code?
Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to improper shifting.
5. How do I diagnose a P0797 code on a 2014 GMC Sierra?
Diagnosis involves checking the transmission fluid condition, inspecting solenoid wiring for damage, testing the solenoid itself, and possibly performing a pressure test on the transmission.
6. How can I fix a P0797 code on my 2014 GMC Sierra?
Repairs may include replacing the pressure control solenoid, flushing and refilling the transmission fluid, repairing damaged wiring, or addressing internal transmission issues.
7. What is the cost to repair a P0797 code on a 2014 GMC Sierra?
Repair costs vary but typically range from $200 to $500 for solenoid replacement. Costs can be higher if transmission disassembly or internal repairs are needed.
8. Can low transmission fluid trigger the P0797 code?
Yes, low or dirty transmission fluid can cause solenoid malfunctions and trigger the P0797 code.
9. Will clearing the P0797 code with a scan tool fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be repaired to prevent the code from returning.
10. Does the P0797 code always mean the solenoid is bad?
Not always. While a faulty solenoid is a common cause, the issue could also stem from wiring problems, dirty fluid, or internal transmission faults.
Discuss the causes and fixes for P0797 2014 GMC Sierra OBDII Code
Code P0797 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.