P0796 2014 GMC Sierra Code - Pressure Control Solenoid Valve 3 Stuck Off
Quick Answer
The P0796 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Pressure Control Solenoid Valve 3 being stuck off. Common causes include Faulty pressure control solenoid valve, Electrical issues such as a wiring harness problem or a faulty transmission control module, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0796 2014 GMC Sierra indicates Pressure Control Solenoid Valve 3 Stuck Off.
- Common causes
- Common causes include Faulty pressure control solenoid valve, Electrical issues such as a wiring harness problem or a faulty transmission control module, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0796 2014 GMC Sierra Description
The P0796 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Pressure Control Solenoid Valve 3 being stuck off. This valve is a crucial component of the transmission system, responsible for regulating the hydraulic pressure within the transmission. When the solenoid valve is stuck in the off position, it can lead to a variety of performance issues within the transmission system.
Common Causes of P0796 2014 GMC Sierra
- Faulty pressure control solenoid valve
- Electrical issues such as a wiring harness problem or a faulty transmission control module
- Low transmission fluid levels
- Internal transmission damage
- Mechanical blockages within the transmission system
Symptoms of P0796 2014 GMC Sierra
- Harsh or delayed shifting
- Erratic transmission behavior
- Decreased fuel efficiency
- Transmission slipping
- Illumination of the Check Engine Light
How to Fix P0796 2014 GMC Sierra
- Perform a diagnostic scan to confirm the P0796 code and identify the specific issue.
- Inspect the pressure control solenoid valve 3 for any signs of damage or blockages.
- Check the transmission fluid level and quality, topping up or replacing as needed.
- Test the electrical connections and wiring related to the solenoid valve for any faults.
- Replace the pressure control solenoid valve 3 if it is found to be faulty, ensuring proper installation and calibration.
Cost to Fix P0796 2014 GMC Sierra
The typical repair costs for addressing a P0796 code can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor to resolve this problem. However, it's important to note that prices may vary based on factors such as location, vehicle make and model, and the extent of the repairs needed. Be sure to consult with a trusted auto repair shop for a more accurate estimate based on your individual circumstances.
Need more information about the P0796 2014 GMC Sierra code?
Need more information on how to fix the P0796 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0796 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0796 2014 GMC Sierra Code
1. What does the OBDII code P0796 mean on a 2014 GMC Sierra?
The code P0796 indicates that the Pressure Control Solenoid Valve 3 in the transmission is stuck in the "off" position, causing improper hydraulic pressure regulation.
2. What are the common symptoms of code P0796 in a 2014 GMC Sierra?
Symptoms include harsh or erratic shifting, failure to shift gears, transmission slipping, decreased fuel efficiency, and possible activation of the check engine light.
3. What causes the P0796 code to appear in a 2014 GMC Sierra?
Common causes include a faulty pressure control solenoid, dirty or low transmission fluid, clogged transmission filters, wiring or connector issues, or internal transmission damage.
4. Can driving with the P0796 code damage my 2014 GMC Sierra?
Yes, driving with this code can cause further transmission damage, leading to more expensive repairs. It’s best to address the issue as soon as possible.
5. How do I diagnose the P0796 code on a 2014 GMC Sierra?
Diagnosis typically involves scanning the vehicle with an OBDII tool, checking the transmission fluid level and condition, inspecting the solenoid and wiring, and performing hydraulic pressure tests if needed.
6. How do I fix the P0796 code on a 2014 GMC Sierra?
Possible fixes include replacing the faulty pressure control solenoid, cleaning or replacing the transmission fluid and filter, repairing damaged wiring or connectors, or rebuilding the transmission if internal damage is found.
7. How much does it cost to repair the P0796 code on a 2014 GMC Sierra?
Repair costs can range from $150 to $400 for solenoid replacement, while a full transmission rebuild could cost $2,000 or more if severe damage is present.
8. Can low transmission fluid cause the P0796 code on a 2014 GMC Sierra?
Yes, low or dirty transmission fluid can lead to improper solenoid operation and trigger the P0796 code.
9. Is the P0796 code a common issue for the 2014 GMC Sierra?
While not extremely common, it can occur, especially in vehicles with high mileage or poor transmission maintenance.
10. Can I clear the P0796 code on my 2014 GMC Sierra without fixing it?
You can temporarily clear the code with an OBDII scanner, but it will likely return if the underlying issue isn’t resolved.
Discuss the causes and fixes for P0796 2014 GMC Sierra OBDII Code
Code P0796 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.