Engine-Codes - MINI - P0795 MINI

P0795 MINI Code - Pressure Control Solenoid Valve 3

- Code Popularity: 962 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0795 MINI?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty pressure control solenoid valve 'C'
  • Pressure control solenoid valve 'C' harness is open or shorted
  • Pressure control solenoid valve 'C' circuit poor electrical connection

|How to Fix the P0795 MINI Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0795 MINI Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

|What is the Cost to Diagnose the Code P0795 MINI?

Labor: 1.0

The cost to diagnose the P0795 MINI code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your MINI have Safety Recalls? → Check here

|When is the P0795 MINI Code Detected?

The P0795 code is detected when the when normal voltage is not applied to solenoid due to open or short or when TCM detects as irregular by comparing target value with monitor value.

|What are Code P0795 MINI Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Shift shock

|What Does the P0795 MINI Code Mean?

The pressure control solenoid valve 'C' is normally low pressure control solenoid. The solenoid is activated to control the apply and release of the 2nd brake and 1st and reverse brake, and torque converter clutch. Lock-up operation, however, is prohibited when A/T fluid temperature is too low. When the accelerator pedal is depressed (less than 1/8) in lockup condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.

P0795 MINI Code - Pressure Control Solenoid Valve 3

|Need more Information on the P0795 MINI Code?

Need more information on how to fix the P0795 MINI code? Get Access to Factory Service Manuals

|Need Help with the P0795 MINI Code?

Get the P0795 MINI code diagnosed by a professional: Find a repair shop in your area