P0793 2019 Honda CR-V Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal
Quick Answer
The P0793 code in a 2019 Honda CR-V indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically that there is no signal being detected. Common causes include Faulty Speed Sensor: The most common cause of this code is a malfunctioning intermediate shaft speed sensor, Wiring Issues: Problems with the wiring or connectors in the sensor circuit can also trigger this code, ECM Malfunction: A fault in the engine control module (ECM) that receives the sensor signal could be another possible cause. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0793 2019 Honda CR-V indicates Intermediate Shaft Speed Sensor 'A' Circuit No Signal.
- Common causes
- Common causes include Faulty Speed Sensor: The most common cause of this code is a malfunctioning intermediate shaft speed sensor, Wiring Issues: Problems with the wiring or connectors in the sensor circuit can also trigger this code, ECM Malfunction: A fault in the engine control module (ECM) that receives the sensor signal could be another possible cause.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0793 2019 Honda CR-V Description
The P0793 code in a 2019 Honda CR-V indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically that there is no signal being detected. The intermediate shaft speed sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the intermediate shaft. This information is used by the vehicle's engine control module (ECM) to determine the appropriate shift points for optimal performance and fuel efficiency.
Common Causes of P0793 2019 Honda CR-V
- Faulty Speed Sensor: The most common cause of this code is a malfunctioning intermediate shaft speed sensor.
- Wiring Issues: Problems with the wiring or connectors in the sensor circuit can also trigger this code.
- ECM Malfunction: A fault in the engine control module (ECM) that receives the sensor signal could be another possible cause.
- Sensor Alignment: Improper alignment or installation of the sensor could lead to a lack of signal transmission.
- Mechanical Damage: Physical damage to the sensor or its components could also cause a no signal issue.
Symptoms of P0793 2019 Honda CR-V
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Erratic Shifting: The transmission may experience erratic shifting patterns, such as delayed or harsh gear changes.
- Stuck in Gear: The transmission may get stuck in a single gear and fail to shift up or down as needed.
- Decreased Fuel Efficiency: A malfunctioning speed sensor can lead to decreased fuel efficiency as the transmission may not be operating optimally.
- Transmission Slipping: The transmission may slip, causing a loss of power or acceleration while driving.
How to Fix P0793 2019 Honda CR-V
- Diagnostic Scan: Begin by using a diagnostic scan tool to retrieve the specific trouble code and confirm the issue with the intermediate shaft speed sensor.
- Sensor Replacement: Replace the faulty intermediate shaft speed sensor with a new, OEM-quality sensor.
- Check Wiring: Inspect the wiring harness and connectors for any signs of damage or corrosion, repairing or replacing as needed.
- ECM Inspection: Check the engine control module for any faults or errors that may be affecting the sensor signal.
- Clear Codes: After completing the repair, clear the diagnostic trouble codes from the vehicle's ECM to reset the system and ensure the issue has been resolved.
Cost to Fix P0793 2019 Honda CR-V
The typical repair costs for addressing a P0793 code in a 2019 Honda CR-V can vary depending on the specific cause of the issue. In general, the cost of a new intermediate shaft speed sensor can range from $50 to $150, depending on the brand and quality. Labor costs for this repair can range from $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total cost for parts and labor for this repair could range from $150 to $450. It's important to note that these are rough estimates, and actual costs may vary based on location, vehicle make and model, and other factors. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.
Need more information about the P0793 2019 Honda CR-V code?
Need more information on how to fix the P0793 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0793 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0793 2019 Honda CR-V Code
1. What does the OBDII code P0793 mean in a 2019 Honda CR-V?
P0793 indicates that the Engine Control Module (ECM) has detected no signal from the intermediate shaft speed sensor 'A' circuit.
2. What are the common symptoms of the P0793 code in a 2019 Honda CR-V?
Symptoms can include erratic or delayed shifting, the transmission stuck in a single gear, reduced fuel efficiency, and the check engine light being illuminated.
3. What causes the P0793 code to appear in a 2019 Honda CR-V?
Potential causes include a faulty intermediate shaft speed sensor, damaged wiring or connectors, a failed transmission control module (TCM), or mechanical issues in the transmission.
4. How do I diagnose the P0793 code on my 2019 Honda CR-V?
Start by scanning for codes with an OBDII scanner, inspecting the speed sensor and its wiring for damage, and testing the sensor’s resistance with a multimeter to confirm functionality.
5. Can I drive my 2019 Honda CR-V with the P0793 code?
Driving with this code is not recommended, as it may lead to poor transmission performance and potential long-term damage.
6. How do I fix the P0793 code on a 2019 Honda CR-V?
Repairs may involve replacing the intermediate shaft speed sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the TCM if necessary.
7. How much does it cost to fix the P0793 code on a 2019 Honda CR-V?
Repair costs can vary, but replacing the speed sensor typically ranges between $100 and $300, depending on parts and labor.
8. Can a dirty transmission fluid cause the P0793 code in a 2019 Honda CR-V?
While unlikely, contaminated fluid can contribute to sensor issues or transmission malfunctions, so regular fluid maintenance is essential.
9. Where is the intermediate shaft speed sensor located on a 2019 Honda CR-V?
The sensor is typically located on the transmission, near the intermediate shaft. Consult your vehicle’s repair manual for the exact location.
10. Do I need to reset the check engine light after fixing the P0793 code on a 2019 Honda CR-V?
Yes, you should use an OBDII scanner to clear the code after repairs to ensure it does not reappear.
Discuss the causes and fixes for P0793 2019 Honda CR-V OBDII Code
Code P0793 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.