P0793 2016 Honda CR-V Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal
Quick Answer
The P0793 code indicates that the Intermediate Shaft Speed Sensor 'A' Circuit is not sending a signal to the vehicle's engine control module. Common causes include Faulty intermediate shaft speed sensor, Damaged wiring or connectors related to the sensor, Corrosion or debris affecting sensor operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0793 2016 Honda CR-V indicates Intermediate Shaft Speed Sensor 'A' Circuit No Signal.
- Common causes
- Common causes include Faulty intermediate shaft speed sensor, Damaged wiring or connectors related to the sensor, Corrosion or debris affecting sensor operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0793 2016 Honda CR-V Description
The P0793 code indicates that the Intermediate Shaft Speed Sensor 'A' Circuit is not sending a signal to the vehicle's engine control module. This sensor is responsible for monitoring the speed of the intermediate shaft in the transmission. When the sensor fails to send a signal, it can lead to issues with the transmission's shifting patterns and overall performance of the vehicle. If not addressed, this issue can potentially cause further damage to the transmission system, resulting in more costly repairs down the line.
Common Causes of P0793 2016 Honda CR-V
- Faulty intermediate shaft speed sensor.
- Damaged wiring or connectors related to the sensor.
- Corrosion or debris affecting sensor operation.
- Issues with the transmission control module.
- Electrical problems within the circuit.
Symptoms of P0793 2016 Honda CR-V
- Check engine light is illuminated on the dashboard.
- Transmission may shift erratically or harshly.
- Loss of power or acceleration.
- Vehicle may go into limp mode, limiting speed and performance.
- Difficulty engaging gears or delayed shifting.
How to Fix P0793 2016 Honda CR-V
- Diagnose the issue by using a scan tool to read the fault codes and pinpoint the exact cause of the problem.
- Inspect the wiring and connectors for any signs of damage, corrosion, or loose connections.
- Test the intermediate shaft speed sensor to determine if it is functioning properly or needs replacement.
- Replace the faulty sensor if needed, ensuring proper installation and connection.
- Clear the fault codes and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P0793 2016 Honda CR-V
The cost of repairing the Intermediate Shaft Speed Sensor 'A' Circuit No Signal code can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing the sensor and addressing any related wiring or connector issues can range from $150 to $500. It's important to factor in diagnostic time and labor rates, which can add to the total repair bill. Therefore, it's advisable to consult with a trusted mechanic or repair shop for an accurate cost estimate based on your vehicle's make and model.
Need more information about the P0793 2016 Honda CR-V code?
Need more information on how to fix the P0793 2016 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0793 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0793 2016 Honda CR-V Code
1. What are the common symptoms of OBDII code P0793 in a 2016 Honda CR-V?
The common symptoms of P0793 include the Check Engine Light coming on, transmission shifting issues, and potential stalling or hesitation during acceleration.
2. What does the OBDII code P0793 on a 2016 Honda CR-V indicate?
P0793 indicates a problem with the Intermediate Shaft Speed Sensor 'A' circuit in the transmission, specifically that there is no signal being received.
3. What are the possible causes of OBDII code P0793 in a 2016 Honda CR-V?
Possible causes of P0793 include a faulty intermediate shaft speed sensor, damaged wiring or connectors in the sensor circuit, or internal transmission issues.
4. How can I diagnose the cause of OBDII code P0793 in my 2016 Honda CR-V?
Diagnosing P0793 typically involves using a scan tool to check for the code, testing the intermediate shaft speed sensor and its circuit, inspecting wiring and connectors, and potentially performing a transmission fluid level and condition check.
5. Can I continue driving my 2016 Honda CR-V with OBDII code P0793?
It is not recommended to continue driving with P0793 as it can lead to further transmission damage and safety issues. It is advisable to have the vehicle inspected and repaired as soon as possible.
6. How is OBDII code P0793 in a 2016 Honda CR-V typically repaired?
Repairing P0793 often involves replacing the faulty intermediate shaft speed sensor, repairing any damaged wiring or connectors, and clearing the code from the vehicle's system.
7. Is it possible to reset OBDII code P0793 in a 2016 Honda CR-V without fixing the underlying issue?
Resetting the code without addressing the underlying issue will only temporarily clear the Check Engine Light. The code is likely to reappear until the root cause is fixed.
8. Are there any DIY tips for troubleshooting OBDII code P0793 in a 2016 Honda CR-V?
While basic checks like inspecting sensor connections and wiring can be done DIY, diagnosing and repairing P0793 often requires specialized tools and expertise, so it's best to consult a professional mechanic.
9. How much does it cost to fix OBDII code P0793 in a 2016 Honda CR-V?
The cost of fixing P0793 can vary depending on the exact cause and the labor rates in your area. It's advisable to get a diagnostic from a trusted mechanic to determine the cost accurately.
10. Can a 2016 Honda CR-V owner prevent OBDII code P0793 from occurring?
Regular maintenance, such as checking and changing transmission fluid as recommended, can help prevent issues that may trigger P0793. Additionally, addressing any transmission problems promptly can help prevent this code from occurring.
Discuss the causes and fixes for P0793 2016 Honda CR-V OBDII Code
-
P0793 shift speed sensor"A" honda city 2015 location for speed sensor area
-
Thanks for your question. On a 2015 Honda City, the shift speed sensor “A” — also called the intermediate shaft speed sensor — is typically located on the outside of the transmission, near the rear side of the transmission case, close to where the driveshaft connects.
To find it:
- Look underneath the vehicle from the driver’s side.
- The sensor is mounted with a small 10mm bolt and has a two-wire connector.
- It's usually near the transmission's end housing — not far from the transmission mount.
Be careful when removing it — the plastic connector can get brittle with age. If you're getting a P0793 code, it could be the sensor itself, the wiring harness, or even metal debris on the sensor tip affecting the signal. Let me know if you need help identifying the part number or checking the wiring.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.