Engine-CodesToyota – P0793 2011 Toyota Camry

P0793 2011 Toyota Camry Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal

Quick Answer

The P0793 diagnostic trouble code (DTC) for a 2011 Toyota Camry indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically a lack of signal being detected. Common causes include Faulty intermediate shaft speed sensor, Damaged or corroded wiring/connectors, Issues with the transmission itself. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0793 2011 Toyota Camry indicates Intermediate Shaft Speed Sensor 'A' Circuit No Signal.
Common causes
Common causes include Faulty intermediate shaft speed sensor, Damaged or corroded wiring/connectors, Issues with the transmission itself.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0793 2011 Toyota Camry Description

The P0793 diagnostic trouble code (DTC) for a 2011 Toyota Camry indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically a lack of signal being detected. The intermediate shaft speed sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the intermediate shaft. This information is used by the vehicle's engine control module (ECM) to ensure that the transmission shifts properly and efficiently.

OBDII Code P0793 2011 Toyota Camry - Intermediate Shaft Speed Sensor 'A' Circuit No Signal
P0793 2011 Toyota Camry Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal

Common Causes of P0793 2011 Toyota Camry

  1. Faulty intermediate shaft speed sensor
  2. Damaged or corroded wiring/connectors
  3. Issues with the transmission itself
  4. ECM software or hardware issues
  5. Electrical system malfunctions

Symptoms of P0793 2011 Toyota Camry

  1. Harsh or delayed shifting
  2. Erratic transmission behavior
  3. Transmission slipping
  4. Decreased fuel efficiency
  5. Reduced power output

How to Fix P0793 2011 Toyota Camry

  1. Begin by diagnosing the issue using a scan tool to confirm the P0793 code and pinpoint the exact cause of the problem.
  2. Inspect the wiring and connectors associated with the intermediate shaft speed sensor for any damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the intermediate shaft speed sensor itself to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
  4. Clear the DTC from the ECM memory and test drive the vehicle to ensure that the transmission is shifting properly and the code does not return.
  5. If the issue persists, further diagnosis may be required to identify any underlying problems with the transmission or ECM.

Cost to Fix P0793 2011 Toyota Camry

The cost of repairing a P0793 code on a 2011 Toyota Camry can vary depending on the specific cause of the issue. In general, the cost of replacing an intermediate shaft speed sensor can range from $150 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or other components need to be replaced. It is recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary between different repair shops and locations.

When is the Code Detected?

The P0793 code is detected when the vehicle speed is more than the 31 mph and the park/neutral switch is OFF or rhe engine speed is less that 300 RPM.

Need more information about the P0793 2011 Toyota Camry code?

Need more information on how to fix the P0793 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0793 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0793 2011 Toyota Camry Code

1. What does OBDII code P0793 mean on a 2011 Toyota Camry?

Code P0793 indicates that the Engine Control Module (ECM) has detected no signal from the intermediate shaft speed sensor 'A' circuit.

2. What are the common symptoms of P0793 in a 2011 Toyota Camry?

Symptoms may include erratic or delayed shifting, transmission slipping, reduced fuel efficiency, or the Check Engine Light turning on.

3. What causes the P0793 code to appear?

Common causes include a faulty intermediate shaft speed sensor, damaged wiring or connectors in the circuit, or a malfunctioning ECM.

4. How do I diagnose the P0793 code on my Toyota Camry?

Diagnosis involves checking the speed sensor’s electrical connections, inspecting the wiring for damage, and testing the sensor’s functionality with a multimeter.

5. Can I drive my 2011 Toyota Camry with a P0793 code?

Driving with this code is not recommended as it can cause transmission performance issues and potential long-term damage.

6. How do I fix the P0793 code on my Toyota Camry?

Repairs may include replacing the intermediate shaft speed sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

7. Where is the intermediate shaft speed sensor located on a 2011 Toyota Camry?

The intermediate shaft speed sensor is typically located on the transmission housing, near the output shaft.

8. How much does it cost to fix a P0793 code on a Toyota Camry?

Repair costs vary but generally range from $150 to $400, depending on whether the sensor, wiring, or ECM needs replacement.

9. Can a bad intermediate shaft speed sensor cause transmission failure?

While a faulty sensor itself won’t cause immediate transmission failure, it can lead to poor shifting, which may accelerate wear on the transmission over time.

10. Is clearing the code enough to fix P0793 on a 2011 Toyota Camry?

No, clearing the code without addressing the underlying issue will likely result in the code returning. Proper diagnosis and repair are necessary.

Discuss the causes and fixes for P0793 2011 Toyota Camry OBDII Code

Code P0793 2011 Toyota Camry comments

No comments found for this page.