P0792 Chrysler Code - Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance
Quick Answer
The P0792 Chrysler code indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically relating to its range or performance. Common causes include Faulty intermediate shaft speed sensor, Wiring or connector issues related to the sensor, Transmission fluid contamination. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0792 Chrysler indicates Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty intermediate shaft speed sensor, Wiring or connector issues related to the sensor, Transmission fluid contamination.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0792 Chrysler Description
The P0792 Chrysler code indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically relating to its range or performance. This sensor is crucial for monitoring the speed of the intermediate shaft in the transmission. If the sensor detects an abnormality in the speed range or performance, it can lead to issues with the transmission shifting properly, causing erratic behavior and potentially damaging other components of the transmission system. Ignoring this code can result in further transmission problems and even complete transmission failure.
Common Causes of P0792 Chrysler
- Faulty intermediate shaft speed sensor
- Wiring or connector issues related to the sensor
- Transmission fluid contamination
- Internal transmission problems
- Electronic control module (ECM) issues
Symptoms of P0792 Chrysler
- Rough or delayed shifting
- Harsh shifting between gears
- Transmission slipping
- Decreased fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0792 Chrysler
- Diagnose the issue by using a scan tool to verify the P0792 code and inspecting the intermediate shaft speed sensor and related components.
- Replace the faulty intermediate shaft speed sensor if it is determined to be the cause of the code.
- Inspect and repair any damaged wiring or connectors connected to the sensor.
- Check and replace transmission fluid if contamination is present.
- If the problem persists, further transmission diagnostics may be required to address internal issues or ECM problems.
Cost to Fix P0792 Chrysler
The cost of repairing the Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance issue can vary depending on the specific cause of the problem. Typically, the cost of replacing the sensor itself ranges from $100 to $200, with additional costs for labor ranging from $100 to $300. Overall, the total repair cost could be anywhere from $200 to $500, but it's important to remember that these are rough estimates and actual costs may differ based on various factors. It's recommended to consult with a certified mechanic for a more accurate cost estimate based on your vehicle's make and model.
When is the Code Detected?
Need more information about the P0792 Chrysler code?
Need more information on how to fix the P0792 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0792 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0792 Chrysler Code
1. What are the common symptoms of OBDII code P0792 in a Chrysler vehicle?
The common symptoms of OBDII code P0792 in a Chrysler vehicle include erratic shifting, transmission slippage, illuminated Check Engine Light, and decreased fuel efficiency.
2. What are the possible causes of the Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance code (P0792) in a Chrysler car?
The possible causes of the P0792 code in a Chrysler vehicle may include a faulty intermediate shaft speed sensor, damaged wiring or connectors related to the sensor, low transmission fluid levels, or internal transmission issues.
3. How can I diagnose the P0792 code in my Chrysler car?
Diagnosing the P0792 code involves using an OBDII scanner to read the code and checking the intermediate shaft speed sensor for proper operation. Additionally, inspecting the wiring and connectors for any damage or corrosion is recommended.
4. Is it safe to continue driving with the P0792 code in my Chrysler vehicle?
It is not recommended to continue driving with the P0792 code present in your Chrysler car, as it can lead to further transmission damage and potentially unsafe driving conditions. It is advisable to address the issue promptly.
5. What is the typical repair process for fixing the P0792 code in a Chrysler car?
The typical repair process for the P0792 code involves replacing the faulty intermediate shaft speed sensor, repairing or replacing damaged wiring or connectors, and clearing the code with an OBDII scanner. It is also recommended to check and refill the transmission fluid as needed.
6. Can I fix the P0792 code in my Chrysler vehicle myself?
While some DIY enthusiasts may be able to replace the intermediate shaft speed sensor and perform basic wiring repairs, diagnosing and repairing transmission issues can be complex. It is recommended to consult a professional mechanic for accurate diagnosis and repairs.
7. How much does it cost to repair the P0792 code in a Chrysler car?
The cost of repairing the P0792 code in a Chrysler vehicle can vary depending on the specific cause of the issue, the labor rates of the repair shop, and the cost of parts. On average, the total cost may range from $200 to $500 or more.
8. Can a bad intermediate shaft speed sensor cause other transmission problems besides the P0792 code?
Yes, a faulty intermediate shaft speed sensor can cause other transmission issues such as harsh shifting, delayed engagement, and transmission overheating. Addressing the P0792 code promptly can help prevent further damage to the transmission.
9. How often does the P0792 code occur in Chrysler vehicles?
The occurrence of the P0792 code in Chrysler vehicles can vary depending on the model and age of the vehicle. It is considered a relatively common OBDII code associated with transmission sensor and circuit issues.
10. Is there a way to prevent the P0792 code from appearing in my Chrysler car?
Regular maintenance of your Chrysler vehicle, including checking and replacing transmission fluid as recommended, can help prevent issues like the P0792 code. Additionally, addressing any warning signs promptly can help avoid more significant transmission problems.
Discuss the causes and fixes for P0792 Chrysler OBDII Code
-
2008 CHRYSLER T&C, 3.8 L, CODES P0732 AND P0792, REPLACED THE INTERMEDIATE SHAFT SENSOR, THE OUTPUT SPEED SENSOR, FLUSHED THE TRANSMISSION AND REPLACED THE FILTER. STILL HAVING 1-2 SHIFT S HARD. THE ENGINE LIGHT CAME RIGHT BACK ON. ANY HELP?
-
P0731 p0792 1790 these all came on after i got atuck in the snow and tried ti rock the van to get out it tries to move forward but juat cant donit like the tranny is slipping but when you shift to park you can feel it catch first gear and lunge forward thwn right back to slipping any suggestions as to if i need annew transmission?
-
I haven't had that problem, but I checked a national database of repairs for the same model, year, and symptoms. According to the database, unfortunately, all the mechanics found that the problem was the transmission assembly. At this point, I recommend having a transmission shop check the transmission for you.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.