Engine-Codes - Lexus - P0776 Lexus

P0776 Lexus Code - Pressure Control Solenoid 'B' Performance

- Code Popularity: 17,103 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0776 Lexus?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2)
  • Pressure Control Solenoid 'B' valve harness is open or shorted
  • Pressure Control Solenoid 'B' valve circuit poor electrical connection
  • Transmission valve body assembly is blocked
  • Faulty Automatic transaxle assembly

|How to Fix the P0776 Lexus Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0776 Lexus Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

|What is the Cost to Diagnose the Code P0776 Lexus?

Labor: 1.0

The cost to diagnose the P0776 Lexus code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Lexus have Safety Recalls? → Check here

|What are Code P0776 Lexus Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

|What Does the P0776 Lexus Code Mean?

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated.
The ECM commands gear shifts by turning the shift solenoid valves on and off. According to the input shaft speed, intermediate (counter) shaft speed, and output shaft speed, the ECM detects the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). When the gear commanded by the ECM and the actual gear are not the same, the ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
P0776 Lexus Code - Pressure Control Solenoid 'B' Performance

|Need more Information on the P0776 Lexus Code?

Need more information on how to fix the P0776 Lexus code? Get Access to Factory Service Manuals

|Need Help with the P0776 Lexus Code?

Get the P0776 Lexus code diagnosed by a professional: Find a repair shop in your area