Engine-Codes
 
OBDII Code List
 
P0776 2011 TOYOTA CAMRY

P0776 2011 TOYOTA CAMRY - Pressure Control Solenoid 'B' Performance Valve SL2

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P0776 2011 TOYOTA CAMRY Possible Causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty line pressure solenoid valve SL2
  • Line pressure solenoid valve SL2 harness is open or shorted
  • Line pressure solenoid valve SL2 circuit poor electrical connection
  • Valve body is blocked

First diagnose P0776 2011 TOYOTA CAMRY code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

P0776 2011 TOYOTA CAMRY Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

Cost of diagnosing the P0776 2011 TOYOTA CAMRY code

    Labor: 1.0

    The cost of diagnosing the P0776 2011 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0776 2011 TOYOTA CAMRY code detected?

The gear required by the Engine Control Module (ECM) does not match the actual gear when driving

P0776 2011 TOYOTA CAMRY Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

P0776 2011 TOYOTA CAMRY Meaning

Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail Safe Function).

OBDII Code P0776 2011 TOYOTA CAMRY - Pressure Control Solenoid 'B' Performance Valve SL2 - Engine-Codes.com

P0776 2011 TOYOTA CAMRY More Information

Need more information on how to fix the P0776 2011 TOYOTA CAMRY code?
Get Access to Factory Service Manuals

Related Information