Engine-Codes - Toyota - P0776 2006 TOYOTA CAMRY

P0776 2006 TOYOTA CAMRY Code - Pressure Control Solenoid 'B' Performance Valve SL2

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0776 2006 TOYOTA CAMRY code possible causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty line pressure solenoid valve SL2
  • Line pressure solenoid valve SL2 harness is open or shorted
  • Line pressure solenoid valve SL2 circuit poor electrical connection
  • Valve body is blocked

|How is the P0776 2006 TOYOTA CAMRY code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0776 2006 TOYOTA CAMRY code tech notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

|What is the cost to diagnose the P0776 2006 TOYOTA CAMRY code

Labor: 1.0

The cost to diagnose the P0776 2006 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0776 2006 TOYOTA CAMRY code detected?

The gear required by the Engine Control Module (ECM) does not match the actual gear when driving

|What are P0776 2006 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

|What is P0776 2006 TOYOTA CAMRY code meaning?

Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail Safe Function).

|Need more information with the P0776 2006 TOYOTA CAMRY code?

Need more information on how to fix the P0776 2006 TOYOTA CAMRY code?
Get Access to Factory Service Manuals

|Need help with a P0776 2006 TOYOTA CAMRY code?

Get the P0776 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area