Engine-Codes.com
Engine-Codes – Honda – P0775 Honda

P0775 Honda Code - Pressure Control Solenoid Valve 'B' Hydraulic System Fault

Quick Answer

The P0775 diagnostic trouble code (DTC) for Honda vehicles refers to an issue with the Pressure Control Solenoid Valve 'B' Hydraulic System. Common causes include Faulty pressure control solenoid valve 'B', Wiring or connector issues in the transmission circuit, TCM malfunction or communication error. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0775 Honda indicates Pressure Control Solenoid Valve 'B' Hydraulic System Fault.
Common causes
Common causes include Faulty pressure control solenoid valve 'B', Wiring or connector issues in the transmission circuit, TCM malfunction or communication error.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0775 Honda Description

The P0775 diagnostic trouble code (DTC) for Honda vehicles refers to an issue with the Pressure Control Solenoid Valve 'B' Hydraulic System. This fault typically indicates a problem with the hydraulic circuit that controls the pressure in the transmission. The transmission control module (TCM) uses the pressure control solenoid valve to regulate the hydraulic pressure within the transmission. If the valve fails or malfunctions, it can lead to improper pressure regulation, causing various transmission issues.

OBDII Code P0775 Honda - Pressure Control Solenoid Valve 'B' Hydraulic System Fault
P0775 Honda Code - Pressure Control Solenoid Valve 'B' Hydraulic System Fault

Common Causes of P0775 Honda

  1. Faulty pressure control solenoid valve 'B'
  2. Wiring or connector issues in the transmission circuit
  3. TCM malfunction or communication error
  4. Low transmission fluid level or contaminated fluid
  5. Mechanical damage to the transmission components

Symptoms of P0775 Honda

  1. Harsh or rough shifting
  2. Delayed gear changes
  3. Transmission slipping
  4. Erratic shifting behavior
  5. Illumination of the Check Engine Light

How to Fix P0775 Honda

  1. Perform a thorough diagnosis using a scan tool to confirm the P0775 code and pinpoint the exact cause of the issue.
  2. Inspect the pressure control solenoid valve 'B' and its wiring for any visible damage or corrosion. Replace the valve if necessary.
  3. Check the transmission fluid level and condition. Top up or replace the fluid if it is low or contaminated.
  4. Test the TCM for proper operation and communication with the transmission components. Repair or replace the TCM if needed.
  5. Clear the DTC and perform a test drive to ensure that the transmission shifts smoothly and the code does not return.

Cost to Fix P0775 Honda

The typical repair costs for addressing a P0775 code in a Honda vehicle can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates and consult with a professional technician for a more accurate estimate. Keep in mind that rates may be higher at dealerships or metropolitan areas, while independent shops may offer more competitive prices.

What does this mean?

Tech Notes for P0775 Honda

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

When is the Code Detected?

The P0775 is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.

Need more information about the P0775 Honda code?

Need more information on how to fix the P0775 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0775 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0775 Honda Code

No Frequently Asked Questions about P0775 Honda Code found.

Discuss the causes and fixes for P0775 Honda OBDII Code

Submit a New Comment

Code P0775 Honda comments

No comments found for this page.