Engine-Codes
 
OBDII Code List
 
P0775 2005 NISSAN ALTIMA SEDAN

P0775 2005 NISSAN ALTIMA SEDAN - Pressure Control Solenoid Valve 'B'

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P0775 2005 NISSAN ALTIMA SEDAN Possible Causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty line pressure solenoid 'B' valve
  • Line pressure solenoid 'B' valve harness is open or shorted
  • Line pressure solenoid 'B' valve circuit poor electrical connection

First diagnose P0775 2005 NISSAN ALTIMA SEDAN code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

P0775 2005 NISSAN ALTIMA SEDAN Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

Cost of diagnosing the P0775 2005 NISSAN ALTIMA SEDAN code

    Labor: 1.0

    The cost of diagnosing the P0775 2005 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0775 2005 NISSAN ALTIMA SEDAN code detected?

The P0775 is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.

P0775 2005 NISSAN ALTIMA SEDAN Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission shift shock

P0775 2005 NISSAN ALTIMA SEDAN Meaning

The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
OBDII Code P0775 2005 NISSAN ALTIMA SEDAN - Pressure Control Solenoid Valve 'B' - Engine-Codes.com

P0775 2005 NISSAN ALTIMA SEDAN More Information

Need more information on how to fix the P0775 2005 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals

Related Information