P0773 Audi Code - Shift Solenoid 'E' Electrical
Quick Answer
The P0773 code for Audi vehicles indicates a problem with the Shift Solenoid 'E' electrical circuit. Common causes include Faulty shift solenoid 'E', Wiring issues or electrical connection problems, Low transmission fluid level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0773 Audi indicates Shift Solenoid 'E' Electrical.
- Common causes
- Common causes include Faulty shift solenoid 'E', Wiring issues or electrical connection problems, Low transmission fluid level.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0773 Audi Description
The P0773 code for Audi vehicles indicates a problem with the Shift Solenoid 'E' electrical circuit. The shift solenoid is a vital component of the transmission system that is responsible for controlling the flow of transmission fluid to engage the appropriate gear for the vehicle's speed and driving conditions. In this case, the code specifically points to an issue with the electrical side of the solenoid, which could prevent it from functioning properly.
Common Causes of P0773 Audi
- Faulty shift solenoid 'E'
- Wiring issues or electrical connection problems
- Low transmission fluid level
- Transmission control module (TCM) malfunction
- Internal transmission damage
Symptoms of P0773 Audi
- Erratic or harsh shifting
- Slipping gears
- Failure to shift gears
- Decreased fuel efficiency
- Illuminated Check Engine Light
How to Fix P0773 Audi
- Diagnose the issue by retrieving the fault codes and performing a thorough inspection of the shift solenoid 'E' and its electrical connections.
- Check the transmission fluid level and quality, topping it off or replacing it if necessary.
- Test the shift solenoid 'E' for proper function and replace it if it is faulty.
- Inspect the wiring harness and connectors for any damage or corrosion, repairing or replacing them as needed.
- Clear the fault codes, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0773 Audi
The typical repair costs for addressing the P0773 code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. Generally, replacing a shift solenoid 'E' can cost anywhere from $150 to $300, with additional costs for diagnostic time, transmission fluid, and labor. Overall, the repair for this issue can range from $300 to $600 or more, depending on the extent of the problem and the shop's rates. It's advisable to consult with a trusted mechanic or dealership to get an accurate estimate based on your vehicle's make and model.
When is the Code Detected?
Need more information about the P0773 Audi code?
Need more information on how to fix the P0773 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0773 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0773 Audi Code
What does the OBDII code P0773 mean for an Audi?
P0773 indicates an electrical issue with the shift solenoid 'E,' which controls fluid flow in the transmission to enable proper gear shifting.
What are the common symptoms of code P0773 in an Audi?
Symptoms may include erratic shifting, delayed gear engagement, transmission slipping, or the vehicle being stuck in one gear.
What causes the P0773 code to appear?
Common causes include a faulty shift solenoid 'E,' damaged wiring or connectors, low transmission fluid, or issues with the transmission control module (TCM).
How can I diagnose the P0773 code in my Audi?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, check the transmission fluid level, and test the shift solenoid for proper operation.
Can driving with the P0773 code damage my Audi?
Yes, driving with this code can lead to further transmission damage or unsafe driving conditions due to improper gear shifting.
How do I fix the P0773 code in my Audi?
Repair steps may include replacing the faulty shift solenoid, repairing damaged wiring, clearing debris in solenoid passages, or updating/replacing the TCM.
What tools are needed to repair the P0773 code in an Audi?
You may need an OBDII scanner, multimeter for electrical testing, transmission fluid, and basic hand tools for accessing the solenoid or wiring.
Is it expensive to repair the P0773 code in an Audi?
Costs can vary, but replacing a shift solenoid typically ranges from $200–$500, depending on labor and parts. Wiring repairs or TCM replacement may increase costs.
Can the P0773 code be triggered by low transmission fluid?
Yes, low or contaminated transmission fluid can affect solenoid operation and trigger the P0773 code.
Should I reset the P0773 code after repairs?
Yes, after addressing the issue, use an OBDII scanner to clear the code and ensure the problem is resolved.
Discuss the causes and fixes for P0773 Audi OBDII Code
Code P0773 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.