Engine-Codes - Chrysler - P0765 CHRYSLER

P0765 CHRYSLER Code - Underdrive Solenoid Circuit Fault

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0765 CHRYSLER code possible causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty UD solenoid valve
  • UD solenoid valve harness is open or shorted
  • UD solenoid valve circuit poor electrical connection

|How is the P0765 CHRYSLER code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P0765 CHRYSLER code

Labor: 1.0

The cost to diagnose the P0765 CHRYSLER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P0765 CHRYSLER code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission will not shift gears

|What is P0765 CHRYSLER code meaning?

Underdrive (UD) clutch solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the Park/Neutral Position (PNP) Switch, Vehicle Speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position. The P0765 code is detected when the ECM detects an improper voltage drop when it tries to operate the solenoid valve.

|Need more information with the P0765 CHRYSLER code?

Need more information on how to fix the P0765 CHRYSLER code?
Get Access to Factory Service Manuals

|Need help with a P0765 CHRYSLER code?

Get the P0765 Chrysler code diagnosed by a professional: Find a repair shop in your area