P0763 Acura Code - Shift Solenoid 'C' Circuit Fault
Quick Answer
The P0763 code for Acura vehicles indicates a Shift Solenoid 'C' Circuit Fault. Common causes include Wiring harness issues, Faulty shift solenoid 'C', Malfunctioning PCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0763 Acura indicates Shift Solenoid 'C' Circuit Fault.
- Common causes
- Common causes include Wiring harness issues, Faulty shift solenoid 'C', Malfunctioning PCM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0763 Acura Description
The P0763 code for Acura vehicles indicates a Shift Solenoid 'C' Circuit Fault. This fault occurs when the Powertrain Control Module (PCM) detects an electrical issue within the shift solenoid 'C' circuit. The shift solenoid 'C' is responsible for controlling the flow of transmission fluid to engage the appropriate gear for smooth shifting. When this circuit fault occurs, it can lead to various transmission issues, affecting the vehicle's performance and drivability.
Common Causes of P0763 Acura
- Wiring harness issues
- Faulty shift solenoid 'C'
- Malfunctioning PCM
- Low transmission fluid levels
- Electrical connection problems
Symptoms of P0763 Acura
- Erratic shifting
- Harsh shifting
- Delayed shifting
- Transmission slipping
- Transmission failure
How to Fix P0763 Acura
- Begin by conducting a thorough diagnostic scan to confirm the P0763 code.
- Inspect the wiring harness for any signs of damage or corrosion. Repair or replace as needed.
- Test the shift solenoid 'C' for proper functionality. Replace if found to be faulty.
- Check the transmission fluid level and quality. Top up or perform a fluid flush if necessary.
- Clear the code from the PCM memory and test drive the vehicle to ensure proper shifting functionality.
Cost to Fix P0763 Acura
The typical repair costs for addressing a Shift Solenoid 'C' Circuit Fault can vary depending on the specific cause of the issue and the labor rates in your area. On average, the parts cost for a shift solenoid 'C' replacement ranges from $100 to $300, while the labor cost can range from $150 to $300. Overall, the total repair cost could range from $250 to $600. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on your vehicle's make and model. Keep in mind that labor rates can fluctuate based on location and the shop's pricing structure.
When is the Code Detected?
Need more information about the P0763 Acura code?
Need more information on how to fix the P0763 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0763 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0763 Acura Code
No Frequently Asked Questions about P0763 Acura Code found.
Discuss the causes and fixes for P0763 Acura OBDII Code
-
my 2001 acura mdx shows engine light on dashboard so i diagnosed it and it says p0763 on the scan tool. so i changed the solenoid shifter c which is the code showing in the scan tool that has a problem and i changed also the transmission filter and trans fluid.when i drive it works fine and after few kilometers engine light shows again and 1st gear was slipping and u need to rev the acceleration first before car starts moving..any help pls!
-
How is the transmission fluid level? Did you notice any debris on the transmission pan?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.