P0762 Mazda Code - Shift Solenoid 'C' Stuck On
Quick Answer
The P0762 diagnostic trouble code (DTC) for Mazda vehicles indicates that the Shift Solenoid 'C' is stuck in the on position. Common causes include Faulty shift solenoid 'C', Low transmission fluid levels, Dirty or contaminated transmission fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0762 Mazda indicates Shift Solenoid 'C' Stuck On.
- Common causes
- Common causes include Faulty shift solenoid 'C', Low transmission fluid levels, Dirty or contaminated transmission fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0762 Mazda Description
The P0762 diagnostic trouble code (DTC) for Mazda vehicles indicates that the Shift Solenoid 'C' is stuck in the on position. The shift solenoid is a crucial component of the transmission system that helps control the flow of transmission fluid and ultimately determines which gear the vehicle is in. When the solenoid is stuck in the on position, it can lead to improper shifting, harsh shifting, or the inability to shift gears at all. This can result in poor vehicle performance, decreased fuel efficiency, and potential damage to other transmission components if not addressed promptly.
Common Causes of P0762 Mazda
- Faulty shift solenoid 'C'
- Low transmission fluid levels
- Dirty or contaminated transmission fluid
- Wiring or electrical issues
- Mechanical problems within the transmission
Symptoms of P0762 Mazda
- Delayed or harsh shifting between gears
- Inability to shift gears at all
- Erratic or unpredictable gear changes
- Decreased fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0762 Mazda
- Begin by checking the transmission fluid level and condition. Top off or replace the fluid if necessary.
- Inspect the wiring and connectors associated with the shift solenoid 'C' for any damage or corrosion. Repair or replace as needed.
- Test the shift solenoid 'C' using a multimeter to determine if it is functioning correctly. Replace the solenoid if it is found to be faulty.
- Clear the DTC from the vehicle's computer using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying mechanical issues within the transmission.
Cost to Fix P0762 Mazda
The cost of repairing a Shift Solenoid 'C' Stuck On issue can vary depending on the make and model of the vehicle, as well as the labor rates in your area. On average, the parts for a shift solenoid replacement can range from $50 to $150, while labor costs can vary from $100 to $300. Therefore, the total cost of repairing this issue can range from $150 to $450. It's essential to consult with a trusted mechanic or repair shop for a more accurate estimate based on your specific vehicle and location. Keep in mind that additional costs may arise if other transmission components need to be repaired or replaced.
Tech Notes for P0762 Mazda
When is the Code Detected?
Need more information about the P0762 Mazda code?
Need more information on how to fix the P0762 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0762 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0762 Mazda Code
What does the OBDII code P0762 mean for a Mazda?
P0762 indicates that the transmission's Shift Solenoid 'C' is stuck in the "on" position, causing improper gear shifting.
What are the symptoms of the P0762 code on a Mazda?
Symptoms may include erratic or delayed shifting, inability to shift into certain gears, transmission slipping, and the check engine light turning on.
What causes the P0762 code to appear in a Mazda?
Common causes include a faulty Shift Solenoid 'C', low or dirty transmission fluid, wiring issues, or a malfunctioning transmission control module (TCM).
Can driving with the P0762 code damage my Mazda?
Yes, driving with this code can cause further damage to the transmission and lead to expensive repairs if not addressed promptly.
How do I diagnose the P0762 code in a Mazda?
Diagnosis involves checking the transmission fluid condition, inspecting solenoid wiring and connectors, testing the solenoid for proper function, and scanning the TCM for related issues.
How do you fix the P0762 code on a Mazda?
Fixes typically involve replacing the faulty Shift Solenoid 'C', flushing or refilling transmission fluid, repairing damaged wiring, or reprogramming/resetting the TCM.
What is the cost of repairing the P0762 code on a Mazda?
Repair costs can vary but typically range from $200 to $500 for solenoid replacement, with additional costs if other components need service.
Can a dirty transmission fluid cause the P0762 code?
Yes, dirty or contaminated transmission fluid can restrict solenoid operation and lead to the P0762 code.
Will resetting the check engine light fix the P0762 code in a Mazda?
No, resetting the light will not resolve the underlying issue. Proper diagnosis and repair are needed to fix the problem.
Is the P0762 code common in Mazdas?
While not the most common issue, it can occur in Mazdas with aging transmissions or poor maintenance of the transmission system.
Discuss the causes and fixes for P0762 Mazda OBDII Code
-
it looks like a cylinder i changed mine and it still slips in 4th and its still in limp mode (only gr 1-2) no manual mode... to get to them you have to drop the tranny pan
-
My 2004 Mazda 3 gave an error code of P0762 when shifting to 3rd gear (never shifted) then acted as if in neutral when shifting to 4th. I test solenoids & they were good. The solution was to replace the 3-4 clutch (called the direct clutch too). Because the Reverse & direct clutch are located directly behind the plate on the driver's side of the transmission, I did not drop the transmission. Did loosen the mounts somewhat. This cost me a total of $100 in parts because I replaced the 2-4 brake band too. Trans works like a dream now.
-
If you have an 04 - 06 Mazda 3, 2.0 with a transmission problem, I'll buy it. I'm a retired engineer & Japanese engineering impresses me.
-
It has come to my attention that a large number of Mazda (FN4A-EL) automatic transmissions are simply replaced & the defective unit trashed. Given an accurate description of a problem I can identify the defective part & repair it. Many error codes like P0762 are oversimplified & mislead the mechanic. Removing & re-installing the transmission is the most difficult task, but attempting to repair the unit while installed Is extremely frustrating & almost as difficult. My recent post didn't take in the frustrations of removing & reinstalling the direct clutch's snap rings & bearings with limited space when the trans is installed in the car. Due to rapidly approaching 80 yrs old, I won't do that again. I will repair units brought to me in central Texas. Unfortunately I have only 1 way to test the transmission after repair, put it back in the car. I've identified 4 different things that can cause the P0762 code. All are easily repaired when the trans can be accessed easily.
. -
You can clear the error code by briefly removing the positive battery terminal. The car will then work in the manual mode. If it gives you an AT code of P0762, when you go to 3rd, your direct clutch is bad. If the solenoid is bad you'd get that error in reverse too. Solenoid C provides pressure to both reverse & direct clutches. I think the piston in your direct clutch is leaking. A fully loaded direct clutch will cost you $60 on E-Bay & is much quicker than replacing the piston & clutch plates.
-
Just an added bit of information. Most of Ford's automatic trans for front wheel drive vehicles are made by Mazda. Nearly all parts are interchangeable, but you should check because some minor differences exist.
-
Just an addition on solenoids in Ford & Mazda transmissions. They are exactly the same, but labeled differently in the repair manual. I've never seen a bad solenoid in either the Ford or Mazda auto transmission, but keep a full set on hand just in case. The most likely failure in this transmission is the 3-4 clutch (direct clutch). located directly behind the transmission side plate on the driver's side.
-
Hello ed harrison... I saw that you Know more about mazda 6 > my car is having PO762 shift solenoid C mal funciton. I went to auto shop and told me to change the whole transmission. My car wont shift for 2 nd to 3 rd gear. They told me the price would would be around 2250 . Please let me know how to fix it for cheaper price if you know thank you .
-
Hello ed harrison... I saw that you Know more about mazda 6 > my car is having PO762 shift solenoid C mal funciton. I went to auto shop and told me to change the whole transmission. My car wont shift for 2 nd to 3 rd gear. They told me the price would would be around 2250 . Please let me know how to fix it for cheaper price if you know thank you .
-
Sounds like your 3-4 (direct) clutch is bad. I suggest you take the transmission out to work on it. The reverse & direct clutch are directly behind that side plate on the driver's side. Sometimes the side plate bearing is damaged so you'd have to replace that too. Just buy a new one. I buy a preloaded reverse & direct clutch (the direct clutch & reverse clutch share some parts) & replace both at the same time. All these parts will run about $200 if you shop on ebay. This is a fairly easy job if you have any mechanical ability at all. Be sure to keep parts separated so you know what goes where. Several snap rings & very small roller bearing races are easily misplaced.
-
Where do you live & how much do you want for the car if you aren't going to repair it?
-
Oh, what year is your Mazda? I'm currently in the middle of repairing an 04 Mazda 3 trans that gave a P0762 error code.
-
Oh, what year is your Mazda? I'm currently in the middle of repairing an 04 Mazda 3 trans that gave a P0762 error code.
-
Hello ed, I am engineering student myself ... I am also trying to fix the car ...my car is mazda 6 2008... If possible I would also like to repair myself. I am student and i just bought that car 2 weeks ago....I cannot affoard to buy the new car or pay 2200 to fix it ....I do not have hand on experience ...but being a mechanical engineer myself ...i do understand the concept...and I am looking to fix if by myself if it is possible ...any help from your side is highly appreciated...thank you
-
The PN of your Mazda 6 transmission is FNR5 (Designates 5 speed Mazda 6 Trans). I suggest you buy a repair manual on that transmission. Google FNR5 disassembly on utube... they have some pretty good tear downs there. I tend to specialize in FN4A-EL transmissions. Ford uses those Mazda Transmissions too. The Mazda transmission's weak point is the 3-4 & reverse clutch & Planetary Carrier get starved of fluid causing it to over heat. I'll help when I can.
-
Buy some of those dental picks for removing snap rings & bearings. They'll save you time & frustration. They cost less than $10 on ebay.
-
What all do you need to replace the 3-4 clutch my 2004 Mazda 3 is doing exactly what you described above
-
Hi Ed, Hopefully this comment reaches you, I know this thread is old.
I have a 2004 Mazda 3 with what looks to be exactly as you described. The only thing I would add is that it's fine in Reverse and when in Manuel shift mode I can shift up to 2nd and then when upshifting into 3rd I get the AT light and the engine RPM doesn't change like it stays in 2nd gear, then it tries to shift into 4th but acts like it's neutral and revs instead of shifting to 4th. Should I jump to doing the fix you described? And not bother with the solenoid? I would like to do this fix and leave Trans in vehicle and deal with the frustrations and they come so I don't have to deal with dropping axles fluids etc. Thank you, Doug in Cali
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.