P0762 2005 NISSAN ALTIMA SEDAN - Shift Solenoid Valve 'C' Stuck On
P0762 2005 NISSAN ALTIMA SEDAN Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'C' valve
- Shift solenoid 'C' valve harness or connectors
- Shift solenoid 'C' valve circuit is open or shorted
First diagnose P0762 2005 NISSAN ALTIMA SEDAN code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0762 2005 NISSAN ALTIMA SEDAN Tech NotesWhen the a transmission solenoid is stuck on, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.
Cost of diagnosing the P0762 2005 NISSAN ALTIMA SEDAN code
Labor: 1.0The cost of diagnosing the P0762 2005 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0762 2005 NISSAN ALTIMA SEDAN code detected?The P0762 code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven.
P0762 2005 NISSAN ALTIMA SEDAN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0762 2005 NISSAN ALTIMA SEDAN MeaningShift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
P0762 2005 NISSAN ALTIMA SEDAN More InformationNeed more information on how to fix the P0762 2005 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals