Engine-Codes - Infiniti - P0760 INFINITI

P0760 INFINITI Code - Shift Solenoid Valve 'C' Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0760 INFINITI code possible causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid 'C' valve
  • Shift solenoid 'C' valve harness or connectors
  • Shift solenoid 'C' valve circuit is open or shorted

|How is the P0760 INFINITI code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P0760 INFINITI code

Labor: 1.0

The cost to diagnose the P0760 INFINITI code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0760 INFINITI code detected?

The P0760 code is detected when the TCM detects an improper voltage drop when it tries to operate the solenoid valve.

|What are P0760 INFINITI code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission will not shift gears

|What is P0760 INFINITI code meaning?

Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

|Need more information with the P0760 INFINITI code?

Need more information on how to fix the P0760 INFINITI code?
Get Access to Factory Service Manuals

|Need help with a P0760 INFINITI code?

Get the P0760 Infiniti code diagnosed by a professional: Find a repair shop in your area