P0755 Ford Code - Shift Solenoid 2 Circuit Malfunction
Quick Answer
The P0755 Ford code indicates a Shift Solenoid 2 Circuit Malfunction. Common causes include Faulty shift solenoid 2, Wiring or connector issues in the shift solenoid circuit, Low transmission fluid level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0755 Ford indicates Shift Solenoid 2 Circuit Malfunction.
- Common causes
- Common causes include Faulty shift solenoid 2, Wiring or connector issues in the shift solenoid circuit, Low transmission fluid level.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0755 Ford Description
The P0755 Ford code indicates a Shift Solenoid 2 Circuit Malfunction. This means that there is an issue with the electrical circuit that controls the second shift solenoid in the transmission. The shift solenoids are responsible for directing transmission fluid to the appropriate clutch packs to engage the gears in an automatic transmission. When this circuit malfunctions, it can cause problems with shifting gears, leading to issues with acceleration, fuel efficiency, and overall drivability of the vehicle.
Common Causes of P0755 Ford
- Faulty shift solenoid 2
- Wiring or connector issues in the shift solenoid circuit
- Low transmission fluid level
- Transmission fluid contamination
- Internal transmission damage
Symptoms of P0755 Ford
- Delayed or harsh shifting between gears
- Slipping or erratic shifting
- Transmission stuck in a single gear
- Decreased fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0755 Ford
- Perform a diagnostic scan to confirm the P0755 Ford code and pinpoint the exact cause of the issue.
- Inspect the wiring and connectors in the shift solenoid 2 circuit for any damage or corrosion. Repair or replace as necessary.
- Check the transmission fluid level and condition. Top off or change the fluid if needed.
- Test the shift solenoid 2 for proper operation. Replace if found to be faulty.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure proper shifting functionality.
Cost to Fix P0755 Ford
The cost of repairing a Shift Solenoid 2 Circuit Malfunction can vary depending on the exact cause of the issue and the labor rates in your area. On average, the parts for a shift solenoid replacement can range from $100 to $300, while labor costs can range from $150 to $300. Overall, you can expect to pay between $250 and $600 for this repair. It's important to keep in mind that additional costs may be incurred if other components or systems are found to be damaged during the diagnostic process. It is recommended to get a specific estimate from an auto repair shop in your area.
Tech Notes for P0755 Ford
When is the Code Detected?
Need more information about the P0755 Ford code?
Need more information on how to fix the P0755 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0755 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0755 Ford Code
1. What are the common symptoms of OBDII code P0755 in a Ford vehicle?
Common symptoms include harsh shifting, delayed or erratic shifting, transmission slipping, and the transmission not engaging properly.
2. What does the OBDII code P0755 Shift Solenoid 2 Circuit Malfunction mean in a Ford?
This code indicates that there is an issue with the electrical circuit of the shift solenoid 2 in the transmission.
3. What are the possible causes of OBDII code P0755 in a Ford?
Possible causes include a faulty shift solenoid 2, damaged wiring or connectors in the circuit, low transmission fluid level, or a problem with the transmission control module.
4. How can I diagnose the Shift Solenoid 2 Circuit Malfunction in my Ford with OBDII code P0755?
Diagnosis typically involves checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the shift solenoid 2, and scanning the vehicle for other related codes.
5. Can I drive my Ford with OBDII code P0755 Shift Solenoid 2 Circuit Malfunction?
It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the transmission. It is best to address the issue promptly.
6. How can I repair OBDII code P0755 in my Ford?
Repair options may include replacing the faulty shift solenoid 2, repairing or replacing damaged wiring or connectors, checking and topping up the transmission fluid, and resetting the trouble codes.
7. Is it possible to reset the OBDII code P0755 Shift Solenoid 2 Circuit Malfunction in a Ford?
Yes, after repairing the underlying issue causing the code, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
8. Will OBDII code P0755 cause my Ford's Check Engine Light to illuminate?
Yes, this code will trigger the Check Engine Light to illuminate on the dashboard of your Ford vehicle.
9. How urgent is it to address OBDII code P0755 in a Ford?
It is important to address this code promptly to prevent further damage to the transmission and ensure the proper operation of your vehicle.
10. Can a DIY enthusiast fix OBDII code P0755 in a Ford, or should I seek professional help?
While some repairs related to this code can be done by a knowledgeable DIY enthusiast, it is recommended to seek professional help, especially when dealing with transmission issues, to ensure proper diagnosis and repair.
Discuss the causes and fixes for P0755 Ford OBDII Code
-
still shifting problems and shuddering even in park and changed transmission fluid and filter no excessive debris in pan
-
If the fluid level and condition is OK and you are still having the same problem, then you may have a problem with the solenoid or an electrical problem. What model and year is your Ford?
-
The information above is the same for the 2001 F150 Super Crew Cab. You probably have a faulty shift solenoid 2 valve.
-
2004 focus auto 16v, replaced solenoids 1&2, filter, 1gal fluid, gasket, still throwing 0755. Not much debris in pan, cleaned it all up. Still shifts rough, but better than before replacements.
-
2006 Ford E250 Super Duty with 4R70W Transmission. Truck has
the CEL on and the OD light is flashing. Truck seems to drive fine but when trying
to accelerate from a complete stop it slam into gear unless it is manually
shifted into first gear. Engine code is P0755.Took the truck to a local Ford Dealer and was told I needed
to replace Shift Solenoid B. Solenoid was replaced. Replacing the solenoid made
absolutely no difference in performance.Took the truck to a Transmission Repair shop and was told it
needed a complete transmission rebuild.
Complete transmission overhaul made no difference in performance. Truck
still has the same problems.Was told by a second Transmission shop that the valves were
sticking and it needed a new valve body. New valve body came with new shift
solenoids. Installation of the new valve body has made absolutely no difference.Any ideas of what to do next would be greatly appreciated.
-
It throws codes p0750 and p0755. Shifts fine, reverse fine. But the overdrive light is flashing and it won't kick into overdrive. Could it just be those solenoids?
-
What model and year is your vehicle? You probably have to replace the solenoid pack.
-
Hello. My problem ended up being a faulty wire in the transmission's internal harness that connects to the shift solenoids. Hope this helps.
-
You probably have to replace the solenoid pack, but before replacing the solenoids, you could start by just changing the transmission fluid and filter.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.