P0752 2015 GMC Sierra Code - Shift Solenoid Valve 1 Performance Stuck On
Quick Answer
The P0752 diagnostic trouble code (DTC) indicates a problem with the Shift Solenoid Valve 1 in the transmission of a 2015 GMC Sierra. Common causes include Faulty Shift Solenoid Valve 1, Electrical issues such as a short or open circuit in the solenoid wiring, Low transmission fluid level or contaminated fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0752 2015 GMC Sierra indicates Shift Solenoid Valve 1 Performance Stuck On.
- Common causes
- Common causes include Faulty Shift Solenoid Valve 1, Electrical issues such as a short or open circuit in the solenoid wiring, Low transmission fluid level or contaminated fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0752 2015 GMC Sierra Description
The P0752 diagnostic trouble code (DTC) indicates a problem with the Shift Solenoid Valve 1 in the transmission of a 2015 GMC Sierra. The Shift Solenoid Valve 1 is responsible for regulating the flow of transmission fluid to control the shifting of gears. When this solenoid is stuck in the "on" position, it can lead to various issues with the vehicle's transmission system.
Common Causes of P0752 2015 GMC Sierra
- Faulty Shift Solenoid Valve 1
- Electrical issues such as a short or open circuit in the solenoid wiring
- Low transmission fluid level or contaminated fluid
- Mechanical problems within the transmission
- Software or programming issues in the transmission control module
Symptoms of P0752 2015 GMC Sierra
- Harsh or delayed shifting
- Slipping gears
- Stuck in a particular gear
- Transmission failure to engage
How to Fix P0752 2015 GMC Sierra
- Perform a thorough diagnosis using a scan tool to confirm the P0752 code and pinpoint the exact cause of the issue.
- Inspect the Shift Solenoid Valve 1 and its wiring for any signs of damage or malfunction. Replace the solenoid if necessary.
- Check the transmission fluid level and condition. Top up or replace the fluid if needed.
- Test the transmission system after repairs to ensure the issue has been resolved.
- Clear the DTC and test drive the vehicle to verify that the symptoms have been eliminated.
Cost to Fix P0752 2015 GMC Sierra
The typical repair costs for addressing a P0752 code can vary depending on the extent of the issue and the specific repairs needed. In general, replacing a Shift Solenoid Valve 1 can cost between $150 to $300, while addressing electrical or fluid-related issues may incur additional costs. Labor rates at auto repair shops can range from $80 to $150 per hour, so the total cost can vary based on the time needed for diagnosis and repairs. It's recommended to obtain quotes from local shops for a more accurate estimate.
Tech Notes for P0752 2015 GMC Sierra
Need more information about the P0752 2015 GMC Sierra code?
Need more information on how to fix the P0752 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0752 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0752 2015 GMC Sierra Code
What does the OBDII code P0752 mean for a 2015 GMC Sierra?
P0752 indicates that Shift Solenoid Valve 1 is stuck in the "on" position, preventing proper gear shifting in the transmission.
What are the symptoms of code P0752 in a 2015 GMC Sierra?
Symptoms may include hard or erratic shifting, transmission slipping, inability to shift gears, reduced fuel economy, or the Check Engine Light illuminating.
What causes the P0752 code in a 2015 GMC Sierra?
Common causes include a stuck or malfunctioning shift solenoid, dirty transmission fluid, blocked fluid passages, or internal transmission damage.
Can driving with code P0752 damage my 2015 GMC Sierra?
Yes, continuing to drive with this code can lead to further transmission damage and reduced performance. It’s best to address the issue promptly.
How can I diagnose code P0752 in my 2015 GMC Sierra?
Start by inspecting the transmission fluid for contamination or low levels, then use a scan tool to confirm solenoid operation and check for related codes.
Is replacing the shift solenoid the only fix for P0752 in a 2015 GMC Sierra?
Not always. Cleaning fluid passages, flushing the transmission, or repairing internal transmission components may also resolve the issue.
How much does it cost to repair code P0752 in a 2015 GMC Sierra?
Repair costs vary but typically range from $150 to $500 for solenoid replacement, depending on labor and parts costs.
Can I fix code P0752 on my 2015 GMC Sierra myself?
If you’re experienced with vehicle repairs, you can try replacing the solenoid or flushing the transmission fluid. Otherwise, a professional mechanic is recommended.
Does code P0752 always require a transmission rebuild?
No, a rebuild is only necessary if the transmission has internal damage. Many cases can be resolved by addressing the solenoid or fluid issues.
Can dirty transmission fluid cause code P0752 in a 2015 GMC Sierra?
Yes, dirty or contaminated transmission fluid can restrict solenoid movement and lead to the P0752 code. Flushing the fluid may resolve the problem.
Discuss the causes and fixes for P0752 2015 GMC Sierra OBDII Code
Code P0752 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.