P0746 Hyundai Code - Pressure Control Solenoid Performance or Stuck Off
Quick Answer
The P0746 Hyundai diagnostic trouble code (DTC) refers to an issue with the Pressure Control Solenoid in the transmission system. Common causes include Malfunctioning Pressure Control Solenoid, Low transmission fluid levels, Dirty or contaminated transmission fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0746 Hyundai indicates Pressure Control Solenoid Performance or Stuck Off.
- Common causes
- Common causes include Malfunctioning Pressure Control Solenoid, Low transmission fluid levels, Dirty or contaminated transmission fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0746 Hyundai Description
The P0746 Hyundai diagnostic trouble code (DTC) refers to an issue with the Pressure Control Solenoid in the transmission system. This code indicates that the Pressure Control Solenoid is either not performing optimally or is stuck in the off position. The Pressure Control Solenoid is responsible for regulating the hydraulic pressure in the transmission, which is crucial for smooth gear shifts and overall transmission performance.
Common Causes of P0746 Hyundai
- Malfunctioning Pressure Control Solenoid
- Low transmission fluid levels
- Dirty or contaminated transmission fluid
- Electrical issues
- Faulty transmission control module
Symptoms of P0746 Hyundai
- Harsh or delayed shifting
- Erratic gear changes
- Transmission slipping
- Poor acceleration
- Illuminated check engine light
How to Fix P0746 Hyundai
- Perform a diagnostic scan to confirm the presence of the P0746 code and identify the specific issue.
- Inspect the Pressure Control Solenoid for any signs of damage or malfunction.
- Check transmission fluid levels and condition, topping off or replacing fluid as needed.
- Test the electrical connections to the Pressure Control Solenoid and transmission control module.
- Replace the Pressure Control Solenoid if it is faulty, clean or flush the transmission system, and reset the code.
Cost to Fix P0746 Hyundai
The typical repair costs for addressing a P0746 Hyundai code can range from $200 to $600, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour, but rates may be higher in metropolitan areas or at dealerships and lower at independent shops. It is advisable to check local rates for a more accurate estimate.
Tech Notes for P0746 Hyundai
Need more information about the P0746 Hyundai code?
Need more information on how to fix the P0746 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0746 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0746 Hyundai Code
1. What does the OBDII code P0746 mean on a Hyundai?
P0746 indicates an issue with the Pressure Control Solenoid, which may be stuck off or performing outside its expected range. This solenoid helps regulate hydraulic pressure in the transmission.
2. What are the symptoms of the P0746 code in a Hyundai?
Common symptoms include harsh or delayed shifting, transmission slipping, poor acceleration, reduced fuel efficiency, or the vehicle going into limp mode. The Check Engine Light will also illuminate.
3. What causes the P0746 code in a Hyundai?
Possible causes include a malfunctioning pressure control solenoid, dirty or degraded transmission fluid, a clogged transmission filter, internal transmission issues, or damaged wiring or connectors in the solenoid circuit.
4. Can I drive a Hyundai with the P0746 code?
While the vehicle might still run, driving with this code may worsen transmission damage. It’s best to address the issue as soon as possible to avoid costly repairs.
5. How is the P0746 code diagnosed in a Hyundai?
A mechanic will use an OBDII scanner to confirm the code, inspect the transmission fluid condition, check the solenoid and related wiring, and possibly perform a hydraulic pressure test.
6. How do you fix the P0746 code on a Hyundai?
Repairs may involve replacing the pressure control solenoid, flushing and refilling the transmission fluid, replacing the transmission filter, or repairing damaged wiring or connectors.
7. How much does it cost to fix the P0746 code in a Hyundai?
The cost varies depending on the repair. Replacing a pressure control solenoid typically costs $200–$400, while a full transmission rebuild may exceed $2,000.
8. Can dirty transmission fluid cause the P0746 code in a Hyundai?
Yes, dirty or degraded transmission fluid can restrict solenoid operation and lead to this code. Flushing and replacing the fluid may resolve the issue in some cases.
9. Does the P0746 code always mean the solenoid is bad?
No, the issue could also stem from wiring problems, transmission fluid issues, or internal transmission damage. Proper diagnosis is essential.
10. How can I prevent the P0746 code from occurring in my Hyundai?
Regularly maintain your transmission by changing the fluid and filter at the recommended intervals, and address any transmission issues promptly to prevent further damage.
Discuss the causes and fixes for P0746 Hyundai OBDII Code
Code P0746 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.