Engine-Codes - Chrysler - P0741 Chrysler

P0741 Chrysler Code - Torque Converter Clutch Circuit Performance

- Code Popularity: 12,682 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code P0741 Chrysler?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty torque converter clutch solenoid valve
  • Torque converter clutch solenoid valve harness or connectors
  • Torque converter clutch solenoid valve circuit is open or shorted
  • Transmission internal mechanical problem

|How to Fix the P0741 Chrysler Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the Cost to Diagnose the Code P0741 Chrysler?

Labor: 1.0

The cost to diagnose the P0741 Chrysler code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Chrysler have Safety Recalls? → Check here

|When is the P0741 Chrysler Code Detected?

The TCM detects tcc slippage greater than calibrated value

|What are Code P0741 Chrysler Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What Does the P0741 Chrysler Code Mean?

The torque converter clutch solenoid valve is activated, with the gear in D4, by the Transmission Control Module (TCM) in response to signals sent from the vehicle speed and the Engine Control Module (ECM). Lock-up piston operation will then be controlled. When the torque converter clutch solenoid valve is activated, the torque converter lockup clutch will engage creating a 1 to 1 RPM ratio between the transmission input shaft and the rotational speed of the torque converter.
Lock-up operation, however, is prohibited when A/T fluid temperature is too low.
When the accelerator pedal is depressed (less than 2/8) in lock-up condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.

P0741 Chrysler Code - Torque Converter Clutch Circuit Performance

|Need more Information on the P0741 Chrysler Code?

Need more information on how to fix the P0741 Chrysler code? Get Access to Factory Service Manuals

|Need Help with the P0741 Chrysler Code?

Get the P0741 Chrysler code diagnosed by a professional: Find a repair shop in your area