P0733 Dodge Code - Gear Ratio Error In Third Gear
Quick Answer
The P0733 diagnostic trouble code (DTC) for Dodge vehicles indicates a gear ratio error in the third gear of the transmission. Common causes include Low transmission fluid level or poor quality fluid, Faulty transmission solenoid, Transmission sensor issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0733 Dodge indicates Gear Ratio Error In Third Gear.
- Common causes
- Common causes include Low transmission fluid level or poor quality fluid, Faulty transmission solenoid, Transmission sensor issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0733 Dodge Description
The P0733 diagnostic trouble code (DTC) for Dodge vehicles indicates a gear ratio error in the third gear of the transmission. This means that the transmission is not shifting correctly into the specified gear ratio, which can lead to various performance issues. The transmission is a crucial component that controls the transfer of power from the engine to the wheels, and any errors in gear ratios can result in poor acceleration, reduced fuel efficiency, and potential damage to the transmission over time.
Common Causes of P0733 Dodge
- Low transmission fluid level or poor quality fluid
- Faulty transmission solenoid
- Transmission sensor issues
- Mechanical problems within the transmission, such as worn gears or bearings
- Electrical issues in the transmission control module
Symptoms of P0733 Dodge
- Delayed or harsh shifting between gears
- Slipping transmission, especially in third gear
- Engine revving higher than usual without a corresponding increase in speed
- Transmission overheating
- Illumination of the Check Engine Light
How to Fix P0733 Dodge
- Check and top up transmission fluid: Ensure the transmission fluid is at the correct level and in good condition.
- Inspect and replace transmission solenoid: The solenoid may need to be replaced if it is malfunctioning.
- Test and replace transmission sensors: Test the sensors for proper function and replace any that are faulty.
- Perform a transmission flush and refill: If the transmission fluid is contaminated, a flush and refill may be necessary.
- Diagnose and repair mechanical or electrical issues: If the above steps do not resolve the problem, a more in-depth inspection of the transmission may be required to identify and fix any underlying mechanical or electrical issues.
Cost to Fix P0733 Dodge
The cost of repairing a P0733 code can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of parts for a transmission solenoid replacement can range from $100 to $300, while replacing transmission sensors can cost between $50 to $200 each. A transmission flush and refill may cost around $150 to $300. Labor costs can add up, with total repair costs potentially ranging from $300 to $1000 or more. It's recommended to consult with a qualified mechanic to get an accurate estimate based on your vehicle's make and model.
Tech Notes for P0733 Dodge
When is the Code Detected?
Need more information about the P0733 Dodge code?
Need more information on how to fix the P0733 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0733 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0733 Dodge Code
1. What are the common symptoms of OBDII code P0733 in a Dodge vehicle?
- Common symptoms include harsh shifting, delayed shifting into third gear, slipping transmission, and the transmission staying in third gear.
2. What does the OBDII code P0733 in a Dodge indicate?
- OBDII code P0733 indicates a gear ratio error in third gear detected by the vehicle's transmission control module.
3. What are the possible causes of OBDII code P0733 in a Dodge?
- The possible causes of P0733 include low transmission fluid, a faulty transmission solenoid, a malfunctioning valve body, or internal transmission damage.
4. How does low transmission fluid contribute to the occurrence of OBDII code P0733 in a Dodge?
- Low transmission fluid can cause improper lubrication and hydraulic pressure, leading to slipping gears and triggering the gear ratio error in third gear.
5. Can I continue driving my Dodge with OBDII code P0733 present?
- It is not recommended to continue driving with OBDII code P0733 as it can lead to further damage to the transmission and potentially result in costly repairs.
6. What are some repair tips for resolving OBDII code P0733 in a Dodge?
- Repair tips include checking and topping up transmission fluid, inspecting and replacing faulty solenoids, and performing a thorough transmission diagnostic to identify the root cause.
7. Is it necessary to visit a mechanic for OBDII code P0733 in a Dodge, or can I diagnose and fix it myself?
- While some DIY enthusiasts may attempt to diagnose and fix P0733, it is recommended to consult a qualified mechanic due to the complexity of transmission systems.
8. How much does it typically cost to repair OBDII code P0733 in a Dodge?
- The cost of repairing P0733 can vary depending on the root cause and extent of the damage, but it may range from a few hundred to over a thousand dollars for more severe cases.
9. Can resetting the OBDII code P0733 in a Dodge make it go away permanently?
- Simply resetting the code may temporarily clear the error, but if the underlying issue causing P0733 is not addressed, the code is likely to reappear once the problem resurfaces.
10. How can regular transmission maintenance help prevent OBDII code P0733 in a Dodge?
- Regular transmission maintenance, such as fluid checks, filter replacements, and timely repairs, can help prevent issues like P0733 by ensuring the transmission operates smoothly and efficiently.
Discuss the causes and fixes for P0733 Dodge OBDII Code
-
had 6 codes po733 po734 po218 p1790 po713 po944 did replace input output speed senors reset everything engine was off then came back on now one code po733 .
-
My 2007 Dodge ram shifts from 1st to 2nd but it won't shift past that any clues
-
Unfortunately there are several things that could cause the symptoms and code you have. You could start by checking the transmission fluid level and condition. Depending on the mileage and condition of you vehicle, you may have a mechanical problem. If the fluid is OK, then my suggestion is to have a transmission specialist shop inspect the transmission.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.