P0732 Chrysler Code - Gear Ratio Error In Second Gear
Quick Answer
The P0732 Chrysler diagnostic trouble code indicates a gear ratio error in the vehicle's second gear. Common causes include Low transmission fluid levels or dirty fluid, Faulty transmission solenoid, Worn or damaged transmission gears. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0732 Chrysler indicates Gear Ratio Error In Second Gear.
- Common causes
- Common causes include Low transmission fluid levels or dirty fluid, Faulty transmission solenoid, Worn or damaged transmission gears.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0732 Chrysler Description
The P0732 Chrysler diagnostic trouble code indicates a gear ratio error in the vehicle's second gear. This means that the transmission is not shifting properly between gears, specifically when moving from first gear to second gear. This can lead to issues such as harsh shifting, slipping, or hesitation during acceleration. The gear ratio error can be caused by a variety of factors, including mechanical problems within the transmission, electrical issues, or sensor malfunctions.
Common Causes of P0732 Chrysler
- Low transmission fluid levels or dirty fluid
- Faulty transmission solenoid
- Worn or damaged transmission gears
- Malfunctioning transmission control module (TCM)
- Electrical issues such as wiring problems or sensor failures
Symptoms of P0732 Chrysler
- Harsh or delayed shifting between first and second gear
- Slipping or jerking sensations during acceleration
- Decreased fuel efficiency
- Illuminated check engine light
- Transmission overheating
How to Fix P0732 Chrysler
- Check and top off transmission fluid levels
- Inspect and replace any faulty transmission solenoids
- Perform a transmission flush to clean out dirty fluid
- Test and replace any worn or damaged transmission gears
- Diagnose and repair any electrical issues affecting the transmission system
Cost to Fix P0732 Chrysler
The cost of repairing a gear ratio error in the second gear can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the repair costs for this type of problem can range from $200 to $1500. This estimate includes parts and labor, with labor rates typically ranging from $80 to $150 per hour. It is recommended to consult with a qualified mechanic or transmission specialist to get a more accurate estimate based on the specific vehicle and location.
Tech Notes for P0732 Chrysler
When is the Code Detected?
Need more information about the P0732 Chrysler code?
Need more information on how to fix the P0732 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0732 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0732 Chrysler Code
1. What does the OBDII code P0732 mean on a Chrysler vehicle?
P0732 indicates a "Gear Ratio Error in Second Gear," meaning the transmission control module has detected a mismatch between the expected and actual gear ratio in second gear.
2. What are the common symptoms of code P0732 on a Chrysler?
Symptoms may include poor acceleration, slipping in second gear, harsh shifting, the transmission staying in limp mode, and the check engine light being illuminated.
3. What causes the P0732 code to appear in a Chrysler?
Common causes include low transmission fluid, a faulty shift solenoid, damaged or worn transmission bands, a defective speed sensor, or internal transmission damage.
4. Can low transmission fluid cause the P0732 code?
Yes, low or contaminated transmission fluid can cause improper hydraulic pressure, leading to a gear ratio error in second gear.
5. How is the P0732 code diagnosed?
A mechanic will typically check the transmission fluid level and condition, inspect wiring and connectors, test the shift solenoids, and use a scan tool to monitor gear ratio data and speed sensor signals.
6. Can I drive my Chrysler with a P0732 code?
Driving with a P0732 code is not recommended, as it can lead to further transmission damage and unsafe driving conditions due to poor shifting or limp mode.
7. How do you fix the P0732 code on a Chrysler?
Repairs may involve replenishing or replacing transmission fluid, repairing or replacing the shift solenoid, fixing wiring issues, replacing a faulty speed sensor, or rebuilding the transmission if there is internal damage.
8. How much does it cost to repair a P0732 code?
Repair costs vary widely depending on the cause, ranging from $100 to $300 for simple fixes like fluid changes or solenoid replacements, to $2,000 or more for a transmission rebuild.
9. Can a faulty speed sensor trigger a P0732 code?
Yes, a malfunctioning input or output speed sensor can cause an incorrect gear ratio reading, leading to the P0732 code.
10. Is it possible for a software issue to cause the P0732 code?
Yes, in rare cases, outdated or corrupted transmission control module (TCM) software can cause improper gear ratio detection. Updating or reprogramming the TCM may resolve the issue.
Discuss the causes and fixes for P0732 Chrysler OBDII Code
-
do not go in reverse go only in 2 gear new fluid filter tcm control valves selenoids
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.