P0729 Mitsubishi Code - Automatic Transmission 6th Gear Incorrect Ratio
Quick Answer
The P0729 code for Mitsubishi vehicles indicates that there is an issue with the automatic transmission's 6th gear incorrect ratio. Common causes include Faulty output speed sensor, Wiring issues or loose connections, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0729 Mitsubishi indicates Automatic Transmission 6th Gear Incorrect Ratio.
- Common causes
- Common causes include Faulty output speed sensor, Wiring issues or loose connections, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0729 Mitsubishi Description
The P0729 code for Mitsubishi vehicles indicates that there is an issue with the automatic transmission's 6th gear incorrect ratio. This means that the signal from the transmission's output speed sensor does not match the signal sent by the engine control module (ECM) for 6th gear. This discrepancy can result in poor performance, reduced fuel efficiency, and potential damage to the transmission system if not addressed promptly. The incorrect gear ratio can lead to harsh shifting, slipping gears, and hesitation during acceleration. It is essential to address this issue promptly to avoid further damage to the transmission system.
Common Causes of P0729 Mitsubishi
- Faulty output speed sensor
- Wiring issues or loose connections
- Low transmission fluid levels
- Mechanical problems in the transmission
- ECM software or programming issues
Symptoms of P0729 Mitsubishi
- Harsh shifting
- Slipping gears
- Hesitation during acceleration
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P0729 Mitsubishi
- Perform a diagnostic scan to confirm the P0729 code and pinpoint the exact cause of the issue
- Inspect the output speed sensor and wiring for any damage or loose connections
- Check transmission fluid levels and top up if necessary
- Test drive the vehicle to verify if the issue has been resolved
- If the problem persists, consider replacing the output speed sensor or addressing any mechanical issues within the transmission
Cost to Fix P0729 Mitsubishi
The cost estimate for repairing the P0729 code on a Mitsubishi vehicle can vary depending on the specific cause of the issue. On average, the repair costs for this type of transmission problem can range from $200 to $500, including parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from multiple shops to get a more accurate estimate.
Need more information about the P0729 Mitsubishi code?
Need more information on how to fix the P0729 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0729 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0729 Mitsubishi Code
What does OBD-II code P0729 mean in a Mitsubishi?
Code P0729 indicates that the transmission’s 6th gear is not maintaining the correct gear ratio, which could be caused by mechanical or electrical issues.
What are the symptoms of code P0729 in a Mitsubishi?
Symptoms may include erratic shifting, slipping in 6th gear, reduced fuel efficiency, and illumination of the check engine light.
Can driving with code P0729 damage my car?
Yes, driving with this code can lead to further transmission damage and reduced performance, potentially increasing repair costs over time.
What causes code P0729 in a Mitsubishi?
Common causes include faulty shift solenoids, worn clutch components, transmission fluid issues, or problems with the transmission control module (TCM).
How can I diagnose code P0729 in a Mitsubishi?
Diagnosis typically involves scanning for stored codes, inspecting transmission fluid, testing shift solenoids, and verifying the functionality of the TCM.
How do I fix code P0729 on my Mitsubishi?
Repairs may include replacing damaged solenoids, refilling or flushing transmission fluid, repairing the TCM, or addressing internal transmission wear.
Can low transmission fluid cause code P0729?
Yes, low or degraded transmission fluid can lead to incorrect gear ratios and trigger this code.
What tools are needed to fix code P0729?
You may need an OBD-II scanner, multimeter, transmission fluid tools, and possibly specialty transmission repair equipment.
Is code P0729 specific to Mitsubishi vehicles?
No, P0729 can appear in various vehicles with automatic transmissions, but specific diagnostic and repair steps may vary by make and model.
Should I take my Mitsubishi to a mechanic for code P0729?
If you're unsure about diagnosing or repairing transmission issues, it’s best to consult a qualified mechanic to prevent further damage.
Discuss the causes and fixes for P0729 Mitsubishi OBDII Code
Code P0729 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.