What are the Possible Causes of the DTC P0724 Pontiac?
NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
Faulty Brake Switch
Brake Switch harness is open or shorted
Brake Switch circuit poor electrical connection
Misadjusted Brake Switch
⚠ Does your Pontiac have Safety Recalls? → Check here
How to Fix the DTC P0724 Pontiac?
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Search for P0724 Pontiac Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
The cost to diagnose the P0724 Pontiac code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
When is the Code Detected?
The stop light switch does not turn off even once vehicle is driven.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
Stop lights may be inoperative
What Does the P0724 Pontiac Code Mean?
The brake switch indicates brake pedal status to the Powertrain Control Module (PCM). The brake switch is a normally-closed switch that supplies battery voltage on circuit 420 to the PCM. Applying the brake pedal opens the switch, interrupting voltage to the PCM. When the brake pedal is released, the PCM receives a constant voltage signal. If the PCM receives a zero voltage signal at the brake switch input, and the torque converter clutch (TCC) is engaged, the PCM de-energizes the TCC solenoid valve. The PCM disregards the brake switch input for TCC scheduling if there is a brake switch circuit fault.
P0724 Pontiac Code - Brake Switch Circuit High Input