P0724 BUICK Code - Brake Switch Circuit High Input
|P0724 BUICK code possible causes
- Faulty Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
- Misadjusted Brake Switch
|How is the P0724 BUICK code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0724 BUICK code
Labor: 1.0The cost to diagnose the P0724 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0724 BUICK code detected?The stop light switch does not turn off even once vehicle is driven.
|What are P0724 BUICK code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Stop lights may be inoperative
|What is P0724 BUICK code meaning?The brake switch indicates brake pedal status to the Powertrain Control Module (PCM). The brake switch is a normally-closed switch that supplies battery voltage on circuit 420 to the PCM. Applying the brake pedal opens the switch, interrupting voltage to the PCM. When the brake pedal is released, the PCM receives a constant voltage signal. If the PCM receives a zero voltage signal at the brake switch input, and the torque converter clutch (TCC) is engaged, the PCM de-energizes the TCC solenoid valve. The PCM disregards the brake switch input for TCC scheduling if there is a brake switch circuit fault.
|Need more information with the P0724 BUICK code?Need more information on how to fix the P0724 BUICK code?
Get Access to Factory Service Manuals