P0724 2010 TOYOTA CAMRY Code - Brake Switch 'B' Circuit High
|P0724 2010 TOYOTA CAMRY code possible causes
- Faulty Brake Switch
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
- Misadjusted Brake Switch
|How is the P0724 2010 TOYOTA CAMRY code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0724 2010 TOYOTA CAMRY code tech notesCheck to see if the bulbs are good if they are good check the STOP fuse and IGN fuse, if they are good most likely the STOP light switch (near the brake pedal) is bad if there is no wiring issues.
|What is the cost to diagnose the P0724 2010 TOYOTA CAMRY code
Labor: 1.0The cost to diagnose the P0724 2010 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0724 2010 TOYOTA CAMRY code detected?The stop light switch does not turn off even once vehicle is driven.
|What are P0724 2010 TOYOTA CAMRY code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Stop lights may be inoperative
|What is P0724 2010 TOYOTA CAMRY code meaning?This brake switch send a signal to the Engine Control Module (ECM). The signal is used to detect when the brakes have been applied. In some models the brake switch signal voltage is the same as the voltage supplied to the stop lights.
|Need more information with the P0724 2010 TOYOTA CAMRY code?Need more information on how to fix the P0724 2010 TOYOTA CAMRY code?
Get Access to Factory Service Manuals