P0723 2009 Ford Fusion Code - Output Shaft Speed Sensor Circuit Intermittent Failure
Quick Answer
The P0723 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates an intermittent failure in the output shaft speed sensor circuit. Common causes include Faulty output shaft speed sensor, Damaged sensor wiring harness, Loose or corroded sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0723 2009 Ford Fusion indicates Output Shaft Speed Sensor Circuit Intermittent Failure.
- Common causes
- Common causes include Faulty output shaft speed sensor, Damaged sensor wiring harness, Loose or corroded sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0723 2009 Ford Fusion Description
The P0723 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates an intermittent failure in the output shaft speed sensor circuit. The output shaft speed sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the output shaft and sending this information to the transmission control module (TCM). This data is essential for the TCM to determine the appropriate shift points for optimal performance and fuel efficiency.
Common Causes of P0723 2009 Ford Fusion
- Faulty output shaft speed sensor
- Damaged sensor wiring harness
- Loose or corroded sensor connections
- Issues with the transmission control module (TCM)
- Electrical issues such as shorts or open circuits
Symptoms of P0723 2009 Ford Fusion
- Erratic shifting behavior
- Transmission slippage
- Harsh shifts
- Limp mode activation
- Poor acceleration
How to Fix P0723 2009 Ford Fusion
- Begin by diagnosing the specific cause of the intermittent failure using a scan tool to retrieve the DTC and inspecting the output shaft speed sensor and its wiring.
- Replace the faulty output shaft speed sensor if it is determined to be the cause of the issue.
- Check and repair any damaged wiring or connections in the sensor circuit.
- Clear the DTC from the vehicle's memory using the scan tool.
- Test drive the vehicle to ensure that the issue has been resolved and that the transmission is functioning properly.
Cost to Fix P0723 2009 Ford Fusion
The typical repair costs for addressing a P0723 code on a 2009 Ford Fusion can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the overall repair costs. It is advisable to consult with local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P0723 2009 Ford Fusion code?
Need more information on how to fix the P0723 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0723 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0723 2009 Ford Fusion Code
1. What does OBDII code P0723 mean for a 2009 Ford Fusion?
P0723 indicates an intermittent failure in the Output Shaft Speed (OSS) Sensor Circuit, which monitors the rotational speed of the transmission's output shaft.
2. What are the common symptoms of code P0723 in a 2009 Ford Fusion?
Symptoms may include erratic shifting, transmission slipping, poor acceleration, the speedometer not working correctly, and the Check Engine Light turning on.
3. What causes the P0723 code to appear in a 2009 Ford Fusion?
Possible causes include a faulty OSS sensor, damaged or corroded wiring, a bad connection in the sensor circuit, or a malfunctioning Powertrain Control Module (PCM).
4. How do I diagnose the P0723 code on my 2009 Ford Fusion?
Start by scanning for trouble codes, inspecting the OSS sensor and its wiring for damage, testing the sensor's resistance with a multimeter, and checking for loose or corroded connections.
5. Can I drive my 2009 Ford Fusion with a P0723 code?
While you may be able to drive with this code, it is not recommended as it can lead to poor transmission performance and potential damage if left unresolved.
6. How do I fix the P0723 code on a 2009 Ford Fusion?
Repairs may involve replacing the OSS sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or in rare cases, reprogramming or replacing the PCM.
7. Where is the Output Shaft Speed Sensor located on a 2009 Ford Fusion?
The OSS sensor is typically located on the transmission, near the output shaft. Consult a repair manual or a professional mechanic for the exact location.
8. How much does it cost to repair a P0723 code on a 2009 Ford Fusion?
Repair costs can vary but typically range from $100 to $300, depending on whether you need a new sensor or wiring repairs.
9. Can a bad Output Shaft Speed Sensor cause transmission damage?
Yes, a faulty OSS sensor can lead to improper transmission operation, which, if ignored, could result in long-term damage to the transmission.
10. Will clearing the code fix the P0723 issue on my 2009 Ford Fusion?
Clearing the code may turn off the Check Engine Light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P0723 2009 Ford Fusion OBDII Code
Code P0723 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.