P0722 2016 GMC Sierra Code - Transmission Output Speed Sensor Circuit No Signal
Quick Answer
The P0722 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Transmission Output Speed Sensor Circuit, specifically that there is no signal being received. Common causes include Faulty Output Speed Sensor: The most common cause of this code is a malfunctioning output speed sensor itself, Wiring Issues: Damage to the wiring harness or connectors associated with the output speed sensor can also trigger this code, Sensor Alignment: Improper alignment or installation of the output speed sensor can cause signal disruption. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2016 GMC Sierra indicates Transmission Output Speed Sensor Circuit No Signal.
- Common causes
- Common causes include Faulty Output Speed Sensor: The most common cause of this code is a malfunctioning output speed sensor itself, Wiring Issues: Damage to the wiring harness or connectors associated with the output speed sensor can also trigger this code, Sensor Alignment: Improper alignment or installation of the output speed sensor can cause signal disruption.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0722 2016 GMC Sierra Description
The P0722 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Transmission Output Speed Sensor Circuit, specifically that there is no signal being received. The output speed sensor is a crucial component of the transmission system as it monitors the speed of the output shaft. This information is used by the vehicle's onboard computer to determine shift points, torque converter lockup, and other important functions related to the transmission.
Common Causes of P0722 2016 GMC Sierra
- Faulty Output Speed Sensor: The most common cause of this code is a malfunctioning output speed sensor itself.
- Wiring Issues: Damage to the wiring harness or connectors associated with the output speed sensor can also trigger this code.
- Sensor Alignment: Improper alignment or installation of the output speed sensor can cause signal disruption.
- Transmission Fluid Contamination: Contaminated transmission fluid can affect the sensor's ability to function properly.
- Internal Transmission Issues: In rare cases, internal transmission problems such as a damaged gear or bearing can lead to this code.
Symptoms of P0722 2016 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Erratic Shifting: The transmission may exhibit erratic shifting behavior, such as slipping, hard shifts, or delayed engagement.
- Harsh Shifting: The transmission may shift harshly, causing a jolt or jerk when changing gears.
- Limp Mode: In severe cases, the transmission may go into limp mode, limiting the vehicle's speed and performance.
- Decreased Fuel Efficiency: A malfunctioning output speed sensor can also lead to decreased fuel efficiency as the transmission struggles to operate efficiently.
How to Fix P0722 2016 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to confirm the P0722 code and pinpoint the exact cause of the problem.
- Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage or corrosion, repairing or replacing as needed.
- Replace Output Speed Sensor: If the sensor is found to be faulty, replace it with a new one following manufacturer guidelines.
- Clear Codes: After the repair is completed, clear the DTC and test drive the vehicle to ensure the issue has been resolved.
- Perform Transmission Service: Consider performing a transmission service to ensure the system is operating smoothly and prevent future issues.
Cost to Fix P0722 2016 GMC Sierra
The cost of repairing a P0722 code on a 2016 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing an output speed sensor ranges from $100 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or other components need to be addressed. It's important to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's specific needs and location. Keep in mind that labor rates can vary significantly, so it's advisable to shop around for the best deal.
Need more information about the P0722 2016 GMC Sierra code?
Need more information on how to fix the P0722 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2016 GMC Sierra Code
No Frequently Asked Questions about P0722 2016 GMC Sierra Code found.
Discuss the causes and fixes for P0722 2016 GMC Sierra OBDII Code
Code P0722 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.