P0722 2012 Ford Fusion Code - Output Shaft Speed Sensor No Signal
Quick Answer
The P0722 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received from the sensor. Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2012 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
- Common causes
- Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0722 2012 Ford Fusion Description
The P0722 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received from the sensor. The Output Shaft Speed Sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the output shaft of the transmission. This information is used by the vehicle's engine control module (ECM) to determine the appropriate shift points for the transmission and ensure smooth operation.
Common Causes of P0722 2012 Ford Fusion
- Faulty Output Shaft Speed Sensor
- Damaged wiring or connectors
- Malfunctioning ECM
- Transmission fluid contamination
- Mechanical issues with the transmission
Symptoms of P0722 2012 Ford Fusion
- Erratic shifting behavior
- Harsh or delayed shifts
- Transmission slipping
- Reduced fuel efficiency
- Vehicle going into limp mode
How to Fix P0722 2012 Ford Fusion
- Begin by conducting a visual inspection of the Output Shaft Speed Sensor, wiring, and connectors for any visible damage or corrosion.
- Use a multimeter to test the sensor for proper resistance and voltage output.
- If the sensor is faulty, replace it with a new OEM sensor and ensure proper installation.
- Check and repair any damaged wiring or connectors as needed.
- Clear the DTC from the ECM memory and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0722 2012 Ford Fusion
The typical repair costs for addressing a P0722 code on a 2012 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of a new Output Shaft Speed Sensor can range from $50 to $150, with additional costs for labor and diagnostic time. Overall, the total repair costs for this issue can range from $150 to $400, including parts and labor. It is important to note that labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P0722 2012 Ford Fusion code?
Need more information on how to fix the P0722 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2012 Ford Fusion Code
1. What does the OBDII code P0722 mean for a 2012 Ford Fusion?
P0722 indicates that the transmission control module (TCM) is not receiving a signal from the output shaft speed (OSS) sensor.
2. What are the common symptoms of code P0722 in a 2012 Ford Fusion?
Symptoms may include erratic shifting, the transmission staying in one gear, poor acceleration, the speedometer not working properly, and the check engine light illuminating.
3. What causes the P0722 code to appear on a 2012 Ford Fusion?
Possible causes include a faulty OSS sensor, damaged wiring or connectors, a malfunctioning TCM, or internal transmission issues.
4. Can I drive my 2012 Ford Fusion with a P0722 code?
Driving with this code is not recommended, as it can lead to poor transmission performance and potentially cause further damage if not addressed.
5. How do I diagnose the P0722 code on a 2012 Ford Fusion?
Diagnosis typically involves checking the OSS sensor, inspecting wiring and connectors for damage, scanning for additional trouble codes, and testing the TCM if necessary.
6. How do I fix the P0722 code on a 2012 Ford Fusion?
Repairs may include replacing the OSS sensor, repairing or replacing damaged wiring or connectors, updating or reprogramming the TCM, or addressing internal transmission problems.
7. Where is the output shaft speed sensor located on a 2012 Ford Fusion?
The OSS sensor is typically located on the transmission, near the output shaft.
8. How much does it cost to fix a P0722 code on a 2012 Ford Fusion?
Repair costs can range from $100 to $300 for sensor replacement or wiring repairs, but costs may be higher if TCM or transmission issues are involved.
9. Can a bad OSS sensor cause other issues in a 2012 Ford Fusion?
Yes, a faulty OSS sensor can lead to transmission shifting problems, reduced fuel efficiency, and potentially damage other components if left unaddressed.
10. Will clearing the P0722 code fix the issue on my 2012 Ford Fusion?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0722 2012 Ford Fusion OBDII Code
Code P0722 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.