P0722 2011 Ford Fusion Code - Output Shaft Speed Sensor No Signal
Quick Answer
The P0722 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates that the vehicle's powertrain control module (PCM) has detected a lack of signal from the output shaft speed sensor. Common causes include Faulty output shaft speed sensor: The sensor itself may be malfunctioning, leading to a lack of signal to the PCM, Damaged wiring or connectors: Corrosion, breaks, or loose connections in the wiring harness or connectors can disrupt the signal transmission, PCM issues: A malfunctioning PCM could be unable to receive or interpret the signal from the output shaft speed sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2011 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
- Common causes
- Common causes include Faulty output shaft speed sensor: The sensor itself may be malfunctioning, leading to a lack of signal to the PCM, Damaged wiring or connectors: Corrosion, breaks, or loose connections in the wiring harness or connectors can disrupt the signal transmission, PCM issues: A malfunctioning PCM could be unable to receive or interpret the signal from the output shaft speed sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0722 2011 Ford Fusion Description
The P0722 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates that the vehicle's powertrain control module (PCM) has detected a lack of signal from the output shaft speed sensor. The output shaft speed sensor is a crucial component of the transmission system that monitors the speed of the output shaft, providing data to the PCM for proper shifting and torque converter lock-up control. When the PCM does not receive a signal from the output shaft speed sensor, it can lead to various issues with the vehicle's transmission performance.
Common Causes of P0722 2011 Ford Fusion
- Faulty output shaft speed sensor: The sensor itself may be malfunctioning, leading to a lack of signal to the PCM.
- Damaged wiring or connectors: Corrosion, breaks, or loose connections in the wiring harness or connectors can disrupt the signal transmission.
- PCM issues: A malfunctioning PCM could be unable to receive or interpret the signal from the output shaft speed sensor.
- Transmission fluid contamination: Contaminated transmission fluid can affect sensor performance and lead to signal issues.
- Mechanical damage: Physical damage to the transmission system, such as a damaged output shaft, can also cause this code to trigger.
Symptoms of P0722 2011 Ford Fusion
- Harsh or delayed shifting: The vehicle may experience rough or delayed shifting between gears, impacting driving comfort and performance.
- Erratic speedometer readings: The speedometer may fluctuate or provide inaccurate readings due to the lack of signal from the output shaft speed sensor.
- Check Engine Light: The illumination of the Check Engine Light is a common symptom of this code, indicating a fault in the transmission system.
- Loss of power: The vehicle may exhibit a loss of power or acceleration due to improper transmission control without the output shaft speed sensor signal.
How to Fix P0722 2011 Ford Fusion
- Diagnose the issue: Use a diagnostic scanner to retrieve the specific trouble code and perform a thorough inspection of the output shaft speed sensor, wiring, and connectors.
- Replace the output shaft speed sensor: If the sensor is found to be faulty, replace it with a new, OEM-quality sensor to restore proper signal transmission.
- Repair or replace damaged wiring: Address any damaged wiring or connectors by repairing or replacing them as needed to ensure a secure connection.
- Clear the DTC: After completing the repairs, clear the DTC from the PCM's memory using a diagnostic scanner to reset the Check Engine Light.
- Test drive and monitor: Take the vehicle for a test drive to ensure that the issue has been resolved, and monitor for any recurring symptoms that may indicate further problems.
Cost to Fix P0722 2011 Ford Fusion
The typical repair costs for addressing a P0722 code on a 2011 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of a new output shaft speed sensor can range from $50 to $150, while labor costs for diagnosis and replacement can add another $100 to $200. Overall, the total repair cost for this issue may fall within the range of $150 to $350, excluding any additional parts or repairs that may be necessary.
Need more information about the P0722 2011 Ford Fusion code?
Need more information on how to fix the P0722 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0722 in a 2011 Ford Fusion?
The common symptoms of OBDII code P0722 in a 2011 Ford Fusion include issues with the vehicle's shifting behavior, harsh or erratic shifting, and the transmission staying in one gear.
2. What does the OBDII code P0722 in a 2011 Ford Fusion indicate?
OBDII code P0722 in a 2011 Ford Fusion indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received from the sensor.
3. What are the possible causes of OBDII code P0722 in a 2011 Ford Fusion?
Possible causes of OBDII code P0722 in a 2011 Ford Fusion include a faulty Output Shaft Speed Sensor, damaged wiring or connectors related to the sensor, or issues with the transmission control module.
4. How can I diagnose the cause of OBDII code P0722 in my 2011 Ford Fusion?
Diagnosing OBDII code P0722 in a 2011 Ford Fusion involves checking the Output Shaft Speed Sensor for proper operation, inspecting the sensor's wiring and connectors for damage, and using a scan tool to read live data from the sensor.
5. Can I continue to drive my 2011 Ford Fusion with OBDII code P0722?
It is not recommended to continue driving a 2011 Ford Fusion with OBDII code P0722, as it can lead to further damage to the transmission and potentially cause unsafe driving conditions.
6. How can I repair OBDII code P0722 in my 2011 Ford Fusion?
To repair OBDII code P0722 in a 2011 Ford Fusion, you may need to replace the Output Shaft Speed Sensor, repair any damaged wiring or connectors, or reprogram the transmission control module.
7. Is it necessary to reset the OBDII code P0722 after repairing the issue in a 2011 Ford Fusion?
Yes, it is necessary to reset the OBDII code P0722 after repairing the issue in a 2011 Ford Fusion to clear the code from the vehicle's memory and ensure proper operation.
8. Can a DIY enthusiast fix OBDII code P0722 in a 2011 Ford Fusion?
A DIY enthusiast with the necessary tools and knowledge may be able to fix OBDII code P0722 in a 2011 Ford Fusion, but it is recommended to consult a professional mechanic for accurate diagnosis and repair.
9. How much does it cost to repair OBDII code P0722 in a 2011 Ford Fusion?
The cost to repair OBDII code P0722 in a 2011 Ford Fusion can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Will OBDII code P0722 in a 2011 Ford Fusion affect fuel efficiency?
OBDII code P0722 in a 2011 Ford Fusion can potentially affect fuel efficiency if left unresolved, as it may cause the transmission to operate inefficiently and lead to increased fuel consumption.
Discuss the causes and fixes for P0722 2011 Ford Fusion OBDII Code
Code P0722 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.