Engine-Codes.com
Engine-Codes – Ford – P0722 2010 Ford Fusion

P0722 2010 Ford Fusion Code - Output Shaft Speed Sensor No Signal

Quick Answer

The P0722 code for a 2010 Ford Fusion indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received by the vehicle's powertrain control module (PCM). Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning PCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0722 2010 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
Common causes
Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning PCM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0722 2010 Ford Fusion Description

The P0722 code for a 2010 Ford Fusion indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received by the vehicle's powertrain control module (PCM). The Output Shaft Speed Sensor is a critical component of the vehicle's transmission system, as it monitors the speed of the output shaft in relation to the transmission's input shaft. This information is crucial for the PCM to properly control the shifting of gears and ensure smooth operation of the transmission.

OBDII Code P0722 2010 Ford Fusion - Output Shaft Speed Sensor No Signal
P0722 2010 Ford Fusion Code - Output Shaft Speed Sensor No Signal

Common Causes of P0722 2010 Ford Fusion

  1. Faulty Output Shaft Speed Sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Malfunctioning PCM
  4. Corrosion or debris affecting sensor operation
  5. Poor electrical connection

Symptoms of P0722 2010 Ford Fusion

  1. Harsh or delayed shifting
  2. Slipping gears
  3. Stuck in a particular gear
  4. Poor acceleration
  5. Reduced fuel efficiency

How to Fix P0722 2010 Ford Fusion

  1. Begin by diagnosing the issue using a scan tool to read the code and check for any additional codes that may be present.
  2. Inspect the Output Shaft Speed Sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
  3. Check the connectors in the sensor circuit for proper connection and repair any damaged wiring.
  4. Clear the code from the PCM memory and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further diagnostics may be required to pinpoint the exact cause of the no signal condition.

Cost to Fix P0722 2010 Ford Fusion

The typical repair costs for addressing a P0722 code on a 2010 Ford Fusion can vary depending on the specific cause of the issue. Replacement of the Output Shaft Speed Sensor itself can range from $100 to $200, while labor costs can add an additional $80 to $150 per hour. Overall, the total repair cost can range from $200 to $500 or more, depending on the extent of the repairs needed. It is advisable to consult with a qualified mechanic or repair shop to get a more accurate estimate based on the specific circumstances of the vehicle in question.

Need more information about the P0722 2010 Ford Fusion code?

Need more information on how to fix the P0722 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0722 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0722 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0722 in a 2010 Ford Fusion?

The common symptoms include erratic shifting, transmission slipping, speedometer not working, and the Check Engine Light illuminating.

2. What does OBDII code P0722 in a 2010 Ford Fusion mean?

Code P0722 indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received from the sensor.

3. What are the potential causes of OBDII code P0722 in a 2010 Ford Fusion?

Potential causes include a faulty Output Shaft Speed Sensor, damaged sensor wiring, a defective sensor connector, or issues with the transmission control module.

4. How can I diagnose the cause of OBDII code P0722 in my 2010 Ford Fusion?

Diagnosis involves checking the sensor wiring and connector for damage, testing the sensor's resistance, and verifying input/output speed sensor data with a scan tool.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P0722?

It is not recommended to drive with code P0722 as it can lead to transmission problems and further damage. It's best to address the issue promptly.

6. How can I repair OBDII code P0722 in my 2010 Ford Fusion?

Repair typically involves replacing the Output Shaft Speed Sensor, repairing or replacing damaged wiring, and ensuring proper connection of the sensor.

7. Are there any DIY tips for fixing OBDII code P0722 in a 2010 Ford Fusion?

While some may attempt DIY repairs, working with transmission sensors and wiring can be complex. It's often best to have a professional diagnose and repair the issue.

8. How much does it cost to fix OBDII code P0722 in a 2010 Ford Fusion?

The cost can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor at a repair shop.

9. Can a bad Output Shaft Speed Sensor cause other problems in a 2010 Ford Fusion?

Yes, a faulty sensor can cause issues like harsh shifting, transmission slipping, and even the transmission going into a failsafe mode to protect itself.

10. How long does it take to repair OBDII code P0722 in a 2010 Ford Fusion?

The repair time can vary based on the exact cause and the shop's workload, but it generally takes around 1-2 hours to diagnose and replace the Output Shaft Speed Sensor.

Discuss the causes and fixes for P0722 2010 Ford Fusion OBDII Code

Submit a New Comment

Code P0722 2010 Ford Fusion comments

No comments found for this page.