P0722 2009 Ford Fusion Code - Output Shaft Speed Sensor No Signal
Quick Answer
The P0722 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the vehicle's powertrain control module (PCM) has detected a lack of signal from the output shaft speed sensor. Common causes include Faulty output shaft speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting sensor operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2009 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
- Common causes
- Common causes include Faulty output shaft speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting sensor operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0722 2009 Ford Fusion Description
The P0722 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the vehicle's powertrain control module (PCM) has detected a lack of signal from the output shaft speed sensor. The output shaft speed sensor is a crucial component of the transmission system that monitors the speed of the output shaft, providing important data for the PCM to control various functions such as shift points, torque converter lockup, and overall transmission performance.
Common Causes of P0722 2009 Ford Fusion
- Faulty output shaft speed sensor
- Damaged wiring or connectors leading to the sensor
- Corrosion or debris affecting sensor operation
- Issues with the PCM
- Transmission fluid contamination or low fluid levels
Symptoms of P0722 2009 Ford Fusion
- Harsh or delayed shifting
- Transmission slipping
- Inability to shift gears
- Illumination of the Check Engine Light
- Decreased fuel efficiency
How to Fix P0722 2009 Ford Fusion
- Diagnose the issue by using a scan tool to retrieve the DTC and inspect the output shaft speed sensor and related components.
- Test the output shaft speed sensor using a multimeter to check for proper resistance and signal output.
- Replace the output shaft speed sensor if it is found to be faulty, ensuring proper installation and connection.
- Inspect and repair any damaged wiring or connectors leading to the sensor.
- Clear the DTC from the PCM's memory and test drive the vehicle to ensure proper operation of the transmission.
Cost to Fix P0722 2009 Ford Fusion
The cost of repairing a P0722 code on a 2009 Ford Fusion can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of a new output shaft speed sensor ranges from $50 to $150, with additional costs for labor ranging from $100 to $200. Overall, you can expect to pay anywhere from $150 to $400 for parts and labor to address this issue. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Need more information about the P0722 2009 Ford Fusion code?
Need more information on how to fix the P0722 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2009 Ford Fusion Code
What does the OBDII code P0722 mean for a 2009 Ford Fusion?
P0722 indicates that the transmission control module (TCM) is not receiving a signal from the output shaft speed sensor, which monitors the rotational speed of the transmission's output shaft.
What are the common symptoms of code P0722 in a 2009 Ford Fusion?
Symptoms may include erratic shifting, transmission slipping, poor acceleration, reduced fuel efficiency, and the check engine light turning on.
What causes the P0722 code in a 2009 Ford Fusion?
Common causes include a faulty output shaft speed sensor, damaged wiring or connectors, issues with the transmission control module (TCM), or internal transmission problems.
Can a faulty output shaft speed sensor cause transmission problems?
Yes, the sensor provides critical data for the TCM to control shifting. If it fails, it can lead to improper gear changes or transmission performance issues.
How do I diagnose code P0722 on my 2009 Ford Fusion?
Start by inspecting the output shaft speed sensor, wiring, and connectors for damage. Use a multimeter to test the sensor's functionality and check for voltage signals.
Can I drive my 2009 Ford Fusion with the P0722 code active?
Driving with this code is not recommended as it may lead to further transmission damage or unsafe driving conditions due to erratic shifting.
How much does it cost to fix code P0722 on a 2009 Ford Fusion?
The repair cost varies, but replacing the output shaft speed sensor typically costs $100-$300, including parts and labor. Wiring repairs or TCM replacement may increase the cost.
Can a software issue cause the P0722 code?
Yes, a faulty or outdated transmission control module (TCM) software could potentially cause the code. A reprogramming or update might be necessary.
How can I reset the P0722 code after repairs?
You can reset the code using an OBDII scanner or by disconnecting the battery for about 15 minutes, though proper repairs must be completed first to prevent recurrence.
What tools are needed to troubleshoot the P0722 code?
Common tools include an OBDII scanner, multimeter, wiring diagrams, and basic hand tools for inspecting and replacing components.
Discuss the causes and fixes for P0722 2009 Ford Fusion OBDII Code
Code P0722 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.