P0722 2007 Ford Fusion Code - Output Shaft Speed Sensor No Signal
Quick Answer
The P0722 diagnostic trouble code (DTC) for a 2007 Ford Fusion indicates that there is no signal being received from the output shaft speed sensor. Common causes include Faulty output shaft speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's performance. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2007 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
- Common causes
- Common causes include Faulty output shaft speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's performance.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0722 2007 Ford Fusion Description
The P0722 diagnostic trouble code (DTC) for a 2007 Ford Fusion indicates that there is no signal being received from the output shaft speed sensor. The output shaft speed sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the output shaft. This information is used by the vehicle's onboard computer to determine shift points, optimize fuel efficiency, and ensure smooth operation of the transmission.
Common Causes of P0722 2007 Ford Fusion
- Faulty output shaft speed sensor
- Damaged wiring or connectors leading to the sensor
- Corrosion or debris affecting the sensor's performance
- Issues with the transmission control module (TCM)
- Electrical problems within the transmission system
Symptoms of P0722 2007 Ford Fusion
- Harsh or delayed shifting
- Erratic shifting patterns
- Transmission getting stuck in a single gear
- Reduced fuel efficiency
- Poor acceleration
How to Fix P0722 2007 Ford Fusion
- Begin by locating the output shaft speed sensor on the transmission.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor using a multimeter to determine if it is functioning properly.
- If the sensor is faulty, replace it with a new one.
- Clear the DTC from the vehicle's onboard computer using a diagnostic scan tool.
Cost to Fix P0722 2007 Ford Fusion
The typical repair costs for addressing a P0722 code on a 2007 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of replacing the output shaft speed sensor itself can range from $100 to $200, including parts and labor. Additional costs may be incurred if there are other underlying issues contributing to the code.
Need more information about the P0722 2007 Ford Fusion code?
Need more information on how to fix the P0722 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2007 Ford Fusion Code
What does the OBDII code P0722 mean for a 2007 Ford Fusion?
P0722 indicates that the transmission control module (TCM) is not receiving a signal from the output shaft speed sensor, which is critical for proper transmission operation.
What are the common symptoms of code P0722 in a 2007 Ford Fusion?
Symptoms may include erratic shifting, transmission staying in one gear, loss of speedometer functionality, and the check engine light being illuminated.
What causes the P0722 code in a 2007 Ford Fusion?
Common causes include a faulty output shaft speed sensor, damaged wiring or connectors, issues with the TCM, or internal transmission problems.
Can driving with code P0722 damage the transmission?
Yes, prolonged driving with this code may lead to transmission overheating or damage due to improper gear shifting.
How can I diagnose the P0722 code on a 2007 Ford Fusion?
Start by inspecting the output shaft speed sensor, wiring, and connectors for damage or corrosion. You can also test the sensor with a multimeter to verify functionality.
How do you fix the P0722 code in a 2007 Ford Fusion?
Repairs may involve replacing the output shaft speed sensor, repairing damaged wiring, cleaning connectors, or addressing TCM or internal transmission issues.
Where is the output shaft speed sensor located on a 2007 Ford Fusion?
The sensor is typically located on the transmission case near the output shaft, which connects to the drive axles.
Can a faulty speed sensor affect fuel efficiency?
Yes, a malfunctioning speed sensor can cause erratic transmission behavior, which may lead to decreased fuel efficiency.
Is replacing the output shaft speed sensor expensive for a 2007 Ford Fusion?
The sensor itself is relatively inexpensive, but labor costs can vary depending on the difficulty of access and the shop rates.
Do I need to reset the car’s computer after fixing the P0722 code?
Yes, after repairs, clear the code using an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for P0722 2007 Ford Fusion OBDII Code
Code P0722 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.