P0720 2009 Honda Accord Code - Output Shaft Speed Sensor Circuit Fault
Quick Answer
The P0720 diagnostic trouble code (DTC) for a 2009 Honda Accord refers to a fault in the Output Shaft Speed Sensor Circuit. Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors in the circuit, Issues with the Transmission Control Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0720 2009 Honda Accord indicates Output Shaft Speed Sensor Circuit Fault.
- Common causes
- Common causes include Faulty Output Shaft Speed Sensor, Damaged wiring or connectors in the circuit, Issues with the Transmission Control Module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0720 2009 Honda Accord Description
The P0720 diagnostic trouble code (DTC) for a 2009 Honda Accord refers to a fault in the Output Shaft Speed Sensor Circuit. This sensor is a crucial component of the vehicle's transmission system as it monitors the speed of the output shaft, providing essential data for the transmission control module (TCM) to adjust shift points and optimize performance. When this sensor circuit malfunctions, it can lead to a range of issues that affect the vehicle's drivability and overall performance.
Common Causes of P0720 2009 Honda Accord
- Faulty Output Shaft Speed Sensor
- Damaged wiring or connectors in the circuit
- Issues with the Transmission Control Module (TCM)
- Electronic interference
- Corrosion in the sensor circuit
Symptoms of P0720 2009 Honda Accord
- Erratic shifting behavior
- Delayed or harsh gear changes
- Transmission slipping
- Limp mode activation
- Illuminated Check Engine light
How to Fix P0720 2009 Honda Accord
- Begin by diagnosing the exact cause of the fault using a scan tool to read the DTC and check the sensor's functionality.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Replace the Output Shaft Speed Sensor if it is found to be faulty.
- Clear the DTC from the vehicle's memory using the scan tool.
- Test drive the vehicle to verify that the issue has been resolved and that the transmission is operating correctly.
Cost to Fix P0720 2009 Honda Accord
The typical repair costs for addressing a P0720 code on a 2009 Honda Accord can vary depending on the specific cause of the fault. On average, the parts cost for a new Output Shaft Speed Sensor ranges from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost can be estimated between $150 and $350. It's important to note that these estimates are general and actual costs may vary based on location, vehicle make and model, and labor rates at auto repair shops.
When is the Code Detected?
Need more information about the P0720 2009 Honda Accord code?
Need more information on how to fix the P0720 2009 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0720 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0720 2009 Honda Accord Code
1. What are common symptoms of OBDII code P0720 in a 2009 Honda Accord?
- Common symptoms include erratic speedometer readings, harsh shifting, and the transmission going into limp mode.
2. What does the OBDII code P0720 indicate in a 2009 Honda Accord?
- OBDII code P0720 indicates a fault in the output shaft speed sensor circuit in the transmission.
3. What are possible causes of the output shaft speed sensor circuit fault in a 2009 Honda Accord?
- Possible causes include a faulty speed sensor, damaged wiring or connectors, or issues with the transmission control module.
4. How can I diagnose the output shaft speed sensor circuit fault in my 2009 Honda Accord?
- Diagnose by checking the speed sensor for proper operation, inspecting the wiring and connectors for damage, and using a scan tool to read the code.
5. Can I drive my 2009 Honda Accord with OBDII code P0720?
- It is not recommended to drive with this code as it can lead to further transmission issues and potential safety hazards.
6. How can I repair the output shaft speed sensor circuit fault in my 2009 Honda Accord?
- Repair involves replacing the faulty speed sensor, repairing any damaged wiring or connectors, and clearing the code with a scan tool.
7. Will resetting the OBDII code P0720 in my 2009 Honda Accord fix the issue?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the fault.
8. How much does it typically cost to repair OBDII code P0720 in a 2009 Honda Accord?
- The cost can vary depending on the exact cause of the fault, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix the output shaft speed sensor circuit fault in a 2009 Honda Accord?
- It is possible for experienced DIY enthusiasts to fix this issue, but it may require specialized tools and knowledge of automotive electrical systems.
10. How long does it take to repair OBDII code P0720 in a 2009 Honda Accord?
- The repair time can vary based on the exact cause of the fault and the skill level of the person performing the repair, but it may take a few hours to complete.
Discuss the causes and fixes for P0720 2009 Honda Accord OBDII Code
Code P0720 2009 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.