P0720 2009 Ford Fusion Code - Output Shaft Speed Sensor Circuit Malfunction
Quick Answer
The P0720 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates a malfunction in the output shaft speed sensor circuit. Common causes include Faulty output shaft speed sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the PCM or transmission control module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0720 2009 Ford Fusion indicates Output Shaft Speed Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty output shaft speed sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the PCM or transmission control module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0720 2009 Ford Fusion Description
The P0720 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates a malfunction in the output shaft speed sensor circuit. The output shaft speed sensor is a critical component of the vehicle's transmission system. It is responsible for monitoring the speed of the output shaft, which is crucial for determining the proper operation of the transmission. When this sensor detects an issue or malfunctions, it can negatively impact the vehicle's performance and overall drivability.
Common Causes of P0720 2009 Ford Fusion
- Faulty output shaft speed sensor
- Damaged or corroded wiring/connectors in the sensor circuit
- Issues with the PCM or transmission control module (TCM)
- Low transmission fluid levels or contaminated fluid
- Mechanical damage to the transmission
Symptoms of P0720 2009 Ford Fusion
- Erratic shifting or difficulty shifting gears
- Harsh or delayed gear changes
- Transmission slipping
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P0720 2009 Ford Fusion
- Diagnose the issue by using a scan tool to read the DTC and inspect the output shaft speed sensor and related components.
- Replace the faulty output shaft speed sensor if necessary.
- Check and repair any damaged or corroded wiring/connectors in the sensor circuit.
- Inspect and potentially replace the transmission fluid if it is low or contaminated.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0720 2009 Ford Fusion
The cost of repairing a P0720 code on a 2009 Ford Fusion can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing the output shaft speed sensor can cost between $100 and $300, while additional repairs or component replacements may increase the total cost. Labor charges can range from $80 to $150 per hour, and the total repair cost could be anywhere from $200 to $500 or more. It is recommended to consult with a professional mechanic or auto repair shop to get an accurate estimate based on your vehicle's specific needs.
Need more information about the P0720 2009 Ford Fusion code?
Need more information on how to fix the P0720 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0720 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0720 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0720 in a 2009 Ford Fusion?
The common symptoms of P0720 in a 2009 Ford Fusion include issues with the vehicle's speedometer, erratic or non-functional shifting of gears, and the illumination of the Check Engine light.
2. What causes the Output Shaft Speed Sensor Circuit Malfunction in a 2009 Ford Fusion?
The most common causes of P0720 in a 2009 Ford Fusion are a faulty output shaft speed sensor, damaged or disconnected wiring related to the sensor, or issues with the sensor's connector.
3. How can I diagnose the Output Shaft Speed Sensor Circuit Malfunction in my 2009 Ford Fusion?
To diagnose P0720, you can use an OBDII scanner to retrieve the trouble code, visually inspect the sensor and its wiring for any visible damage, and perform a continuity test on the sensor's circuit.
4. Can I continue driving my 2009 Ford Fusion with OBDII code P0720?
It is not recommended to continue driving your Fusion with P0720 as it can lead to further damage to the transmission and other components. It's best to address the issue promptly.
5. How do I repair the Output Shaft Speed Sensor Circuit Malfunction in my 2009 Ford Fusion?
Repairing P0720 involves replacing the faulty output shaft speed sensor, repairing or replacing damaged wiring, and ensuring a secure connection at the sensor's connector.
6. Will resetting the Check Engine light fix OBDII code P0720 in my 2009 Ford Fusion?
Simply resetting the Check Engine light will not fix P0720. You need to address the underlying issue causing the malfunction to prevent the code from reoccurring.
7. Are there any DIY tips for troubleshooting OBDII code P0720 in a 2009 Ford Fusion?
DIY troubleshooting tips include checking the sensor and its wiring for physical damage, ensuring the sensor is securely connected, and using an OBDII scanner to reset the code for testing purposes.
8. How much does it cost to repair OBDII code P0720 in a 2009 Ford Fusion?
The cost of repairing P0720 in a 2009 Ford Fusion can vary depending on the extent of the issue, but it typically ranges from $150 to $300 for parts and labor.
9. Can a mechanic easily fix OBDII code P0720 in a 2009 Ford Fusion?
A qualified mechanic should be able to diagnose and repair P0720 in a 2009 Ford Fusion efficiently, as they have the expertise and tools required to address the issue effectively.
10. What is the importance of addressing OBDII code P0720 promptly in a 2009 Ford Fusion?
Addressing P0720 promptly is crucial to prevent further damage to the transmission and ensure the safe and reliable operation of your 2009 Ford Fusion.
Discuss the causes and fixes for P0720 2009 Ford Fusion OBDII Code
-
I recently had a problem with my battery, it exploded. It was a few days before I could replace it. After replacing it the car would not start, security light flashing and car turning over as usual, but not starting. I reset security system by turning switch on and off 2 times and then back on, then mashing the brake pedal 2 times easy and 1 time firm and holding down for 15 seconds. Car started. BUT, the wrench light stayed on and so did the check engine light. I shut it off. Then restarted it and let it get to operating temperature and turned air conditioning on max cooling for 1minute and drove for 10 miles. NO FIX. Upon starting car, only check engine light is on, but speedometer doesn't work until car shifts into 3rd gear and then doors lock and wrench light comes on and speedometer is working. Transmission is shifting kind of hard also. Help please.
-
We apologize for the late response; other than checking all the fuses and burned wires, there is not much we can recommend from here. Unfortunately, during a battery explosion, there several things that can get damaged. You have to have a technician check all the wires and components for you.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.