P0720 2008 Honda Accord Code - Output Shaft Speed Sensor Circuit Fault
Quick Answer
The P0720 code on a 2008 Honda Accord indicates a fault in the output shaft speed sensor circuit. Common causes include Damaged wiring or connectors, Faulty output shaft speed sensor, Corrosion or contamination in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0720 2008 Honda Accord indicates Output Shaft Speed Sensor Circuit Fault.
- Common causes
- Common causes include Damaged wiring or connectors, Faulty output shaft speed sensor, Corrosion or contamination in the sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0720 2008 Honda Accord Description
The P0720 code on a 2008 Honda Accord indicates a fault in the output shaft speed sensor circuit. The output shaft speed sensor is a crucial component in the vehicle's transmission system, as it monitors the speed of the transmission output shaft. This information is vital for the proper operation of the transmission, as it helps the vehicle's computer system determine when to shift gears.
Common Causes of P0720 2008 Honda Accord
- Damaged wiring or connectors
- Faulty output shaft speed sensor
- Corrosion or contamination in the sensor connections
- Issues with the transmission control module
- Electrical problems in the circuit
Symptoms of P0720 2008 Honda Accord
- Erratic or harsh shifting
- Hesitation when accelerating
- Transmission slipping out of gear
- Vehicle going into limp mode
- Illumination of the check engine light
How to Fix P0720 2008 Honda Accord
- Begin by diagnosing the issue with a scan tool to confirm the P0720 code.
- Inspect the wiring and connectors for any signs of damage or corrosion.
- Test the output shaft speed sensor to determine if it is functioning correctly.
- Replace the sensor if it is found to be faulty.
- Clear the code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0720 2008 Honda Accord
The cost of repairing a P0720 code on a 2008 Honda Accord can vary depending on the specific cause of the issue. In general, the cost of replacing an output shaft speed sensor can range from $100 to $200 for the part alone. Labor costs can add another $100 to $200, bringing the total repair cost to around $200 to $400. Keep in mind that these are rough estimates, and actual costs may vary based on the location, labor rates, and any additional repairs that may be needed. It is advisable to consult with a trusted mechanic or repair shop for a more accurate cost estimate.
When is the Code Detected?
Need more information about the P0720 2008 Honda Accord code?
Need more information on how to fix the P0720 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0720 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0720 2008 Honda Accord Code
1. What are common symptoms of OBDII code P0720 in a 2008 Honda Accord?
- Common symptoms include erratic or non-functioning speedometer, harsh shifting, and the transmission going into failsafe mode.
2. What does the OBDII code P0720 indicate in a 2008 Honda Accord?
- OBDII code P0720 indicates a fault in the output shaft speed sensor circuit.
3. What are possible causes of OBDII code P0720 in a 2008 Honda Accord?
- Possible causes include a faulty output shaft speed sensor, damaged sensor wiring, or a malfunctioning transmission control module.
4. How can I diagnose the OBDII code P0720 on my 2008 Honda Accord?
- You can diagnose the code by performing a visual inspection of the sensor and its wiring, checking for proper sensor operation with a multimeter, and scanning the vehicle's computer for additional fault codes.
5. Can I still drive my 2008 Honda Accord with the OBDII code P0720?
- It is not recommended to drive the vehicle with the code present, as it can lead to transmission issues and potential safety hazards.
6. Is it possible to reset the OBDII code P0720 in a 2008 Honda Accord?
- While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the fault to prevent it from reoccurring.
7. How much does it typically cost to repair OBDII code P0720 in a 2008 Honda Accord?
- The cost of repairing the code can vary depending on the specific cause, but it may range from $200 to $500 for parts and labor.
8. Can a DIY enthusiast fix OBDII code P0720 in a 2008 Honda Accord?
- Depending on your skill level and access to tools, you may be able to replace the output shaft speed sensor yourself. However, diagnosing and repairing wiring or module issues may require professional expertise.
9. How urgent is it to address OBDII code P0720 in a 2008 Honda Accord?
- It is advisable to address the issue promptly to prevent further damage to the transmission and ensure the vehicle operates safely and efficiently.
10. Will fixing OBDII code P0720 improve the performance of my 2008 Honda Accord?
- Yes, resolving the code will restore proper transmission function, improve shifting quality, and eliminate related symptoms such as speedometer issues.
Discuss the causes and fixes for P0720 2008 Honda Accord OBDII Code
Code P0720 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.