P0713 KIA Code - Transmission Fluid Temperature Sensor High Input
Quick Answer
The P0713 code for KIA vehicles indicates a problem with the transmission fluid temperature sensor, specifically a high input signal. Common causes include Faulty Transmission Fluid Temperature Sensor: The sensor itself may be malfunctioning and reporting incorrect temperature data to the ECM, Wiring or Connector Issues: A damaged or corroded wire or connector in the sensor circuit can cause a high input signal, Low Transmission Fluid Levels: Low transmission fluid levels can cause the transmission to overheat, triggering the high input signal from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0713 KIA indicates Transmission Fluid Temperature Sensor High Input.
- Common causes
- Common causes include Faulty Transmission Fluid Temperature Sensor: The sensor itself may be malfunctioning and reporting incorrect temperature data to the ECM, Wiring or Connector Issues: A damaged or corroded wire or connector in the sensor circuit can cause a high input signal, Low Transmission Fluid Levels: Low transmission fluid levels can cause the transmission to overheat, triggering the high input signal from the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0713 KIA Description
The P0713 code for KIA vehicles indicates a problem with the transmission fluid temperature sensor, specifically a high input signal. The transmission fluid temperature sensor is responsible for monitoring the temperature of the transmission fluid and sending this information to the vehicle's engine control module (ECM). The ECM uses this data to adjust the transmission shift points and ensure optimal performance. When the sensor reports a high input signal, it means that the transmission fluid is hotter than expected, which can lead to various issues with the vehicle's performance and potentially cause long-term damage.
Common Causes of P0713 KIA
- Faulty Transmission Fluid Temperature Sensor: The sensor itself may be malfunctioning and reporting incorrect temperature data to the ECM.
- Wiring or Connector Issues: A damaged or corroded wire or connector in the sensor circuit can cause a high input signal.
- Low Transmission Fluid Levels: Low transmission fluid levels can cause the transmission to overheat, triggering the high input signal from the sensor.
- Contaminated Transmission Fluid: Contaminants in the transmission fluid can affect the sensor's ability to accurately measure the temperature.
- Malfunctioning ECM: In some cases, the issue may be with the vehicle's engine control module, which is not properly interpreting the data from the sensor.
Symptoms of P0713 KIA
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Transmission Overheating: If the transmission fluid temperature sensor is reporting a high input signal, the transmission may overheat, leading to issues such as slipping gears or harsh shifting.
- Delayed or Rough Shifting: The ECM relies on accurate temperature data from the sensor to adjust the transmission shift points. A faulty sensor can cause delayed or rough shifting.
- Decreased Fuel Efficiency: A malfunctioning transmission fluid temperature sensor can impact the overall performance of the vehicle, leading to decreased fuel efficiency as the transmission struggles to operate efficiently.
How to Fix P0713 KIA
- Diagnose the Issue: Use a diagnostic scanner to retrieve the stored fault code and perform a thorough inspection of the transmission fluid temperature sensor, wiring, and connectors.
- Replace the Sensor: If the sensor is found to be faulty, it will need to be replaced with a new, OEM-quality sensor.
- Check Transmission Fluid Levels: Ensure that the transmission fluid levels are at the correct level and top up or replace the fluid if necessary.
- Clear the Fault Code: After replacing the sensor and addressing any other issues, clear the fault code from the ECM's memory using a diagnostic scanner.
- Test Drive: Take the vehicle for a test drive to ensure that the transmission is operating correctly and that the high input signal has been resolved.
Cost to Fix P0713 KIA
The cost of repairing a P0713 code for a KIA vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $150 to $400 for parts and labor. This estimate includes the cost of a new transmission fluid temperature sensor, any necessary transmission fluid, and the labor required to diagnose and repair the issue. Keep in mind that labor rates at auto repair shops can vary, so it's a good idea to get quotes from multiple shops to find the best price. Additionally, if the issue is more complex and requires additional repairs, such as replacing the ECM, the total cost may be higher.
When is the Code Detected?
Need more information about the P0713 KIA code?
Need more information on how to fix the P0713 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0713 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0713 KIA Code
1. What does the OBDII code P0713 mean on a KIA?
P0713 indicates that the transmission fluid temperature sensor is reporting a higher-than-expected voltage signal, suggesting an issue with the sensor or its circuit.
2. What are the common symptoms of code P0713 in a KIA?
Symptoms may include delayed or harsh shifting, transmission overheating, poor fuel economy, the check engine light turning on, or the vehicle entering limp mode.
3. What causes the P0713 code in a KIA?
Common causes include a faulty transmission fluid temperature sensor, damaged wiring or connectors, low or dirty transmission fluid, or issues with the powertrain control module (PCM).
4. Can I drive my KIA with a P0713 code?
While the vehicle may still be drivable, driving with this code can cause further damage to the transmission if overheating occurs. It’s best to address the issue as soon as possible.
5. How do I diagnose the P0713 code on my KIA?
Start by using a scan tool to confirm the code, inspect the wiring and connectors for damage, check the transmission fluid level and condition, and test the temperature sensor for proper resistance values.
6. How do I fix the P0713 code on a KIA?
Repairs may include replacing the transmission fluid temperature sensor, repairing or replacing damaged wiring, cleaning connectors, or performing a transmission fluid change.
7. How much does it cost to fix a P0713 code on a KIA?
Repair costs can vary but typically range from $150 to $300, depending on whether the sensor needs replacement or if additional wiring repairs are required.
8. Can low transmission fluid cause the P0713 code?
Yes, low or contaminated transmission fluid can cause erratic temperature readings, leading to the P0713 code.
9. Does a P0713 code always mean the sensor is bad?
No, the issue could also stem from damaged wiring, connector problems, or even a malfunctioning PCM. Proper diagnosis is essential.
10. Will clearing the P0713 code fix the problem on my KIA?
Clearing the code won’t fix the underlying issue. If the root cause isn’t addressed, the code will likely return.
Discuss the causes and fixes for P0713 KIA OBDII Code
Code P0713 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.