P0712 Audi Code - Transmission Fluid Temperature Sensor Low Input
Quick Answer
The P0712 diagnostic trouble code for Audi indicates that the transmission fluid temperature sensor is reporting a low input signal to the vehicle's engine control module (ECM) or transmission control module (TCM). Common causes include Faulty transmission fluid temperature sensor, Wiring or connector issues in the sensor circuit, Low transmission fluid level or contaminated fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0712 Audi indicates Transmission Fluid Temperature Sensor Low Input.
- Common causes
- Common causes include Faulty transmission fluid temperature sensor, Wiring or connector issues in the sensor circuit, Low transmission fluid level or contaminated fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0712 Audi Description
The P0712 diagnostic trouble code for Audi indicates that the transmission fluid temperature sensor is reporting a low input signal to the vehicle's engine control module (ECM) or transmission control module (TCM). This sensor is responsible for monitoring the temperature of the transmission fluid, which is crucial for the proper functioning of the transmission system. When the sensor reports a low input signal, it means that the transmission fluid temperature is below the normal operating range.
Common Causes of P0712 Audi
- Faulty transmission fluid temperature sensor
- Wiring or connector issues in the sensor circuit
- Low transmission fluid level or contaminated fluid
- Faulty ECM or TCM
- Extreme cold weather affecting sensor readings
Symptoms of P0712 Audi
- Delayed or erratic shifting
- Transmission slipping
- Decreased fuel efficiency
- Illuminated check engine light
- Transmission overheating warning
How to Fix P0712 Audi
- Begin by checking the transmission fluid level and condition. Top off or replace the fluid if necessary.
- Inspect the wiring and connectors associated with the transmission fluid temperature sensor for any damage or corrosion. Repair or replace as needed.
- Test the transmission fluid temperature sensor using a multimeter to determine if it is providing accurate readings. Replace the sensor if it is faulty.
- Clear the diagnostic trouble codes from the vehicle's ECM or TCM using a scan tool.
- Test drive the vehicle to ensure that the transmission is operating properly and that the code does not return.
Cost to Fix P0712 Audi
The cost of repairing a P0712 code on an Audi can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $150 to $400 for parts and labor. Keep in mind that labor rates at auto repair shops can vary, so it's a good idea to get a few quotes from different locations to find the best price. Additionally, the cost of the transmission fluid temperature sensor itself can range from $50 to $150, depending on the brand and quality of the part.
When is the Code Detected?
Need more information about the P0712 Audi code?
Need more information on how to fix the P0712 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0712 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0712 Audi Code
1. What does the OBDII code P0712 mean in an Audi?
P0712 indicates that the transmission fluid temperature sensor is reporting a reading that is too low, suggesting a possible fault in the sensor, wiring, or related components.
2. What are the common symptoms of P0712 in an Audi?
Symptoms may include erratic or harsh shifting, the transmission going into limp mode, poor fuel efficiency, or the check engine light being illuminated.
3. What causes the P0712 code to appear in an Audi?
Causes may include a faulty transmission fluid temperature sensor, damaged or corroded wiring or connectors, low transmission fluid levels, or a malfunctioning transmission control module (TCM).
4. Can I drive my Audi with the P0712 code active?
It is not recommended to drive with this code active for an extended period, as improper transmission fluid temperature readings can lead to transmission damage and reduced performance.
5. How do I diagnose the P0712 code in my Audi?
Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors for the temperature sensor, and testing the sensor itself for proper functionality.
6. How do I fix the P0712 code in my Audi?
Repairs may involve replacing the transmission fluid temperature sensor, repairing or replacing damaged wiring, or ensuring the transmission fluid is at the correct level and free of contaminants.
7. How much does it cost to repair the P0712 code in an Audi?
Repair costs can vary but generally range from $150 to $400, depending on whether the issue is with the sensor, wiring, or fluid.
8. Can low transmission fluid cause the P0712 code in an Audi?
Yes, low transmission fluid can cause incorrect temperature readings, triggering the P0712 code.
9. What happens if I ignore the P0712 code in my Audi?
Ignoring this code can lead to further transmission issues, such as overheating, poor performance, or even transmission failure.
10. How can I prevent the P0712 code from occurring in my Audi?
Regular maintenance, including checking and changing the transmission fluid and inspecting the sensor and wiring, can help prevent this code from occurring.
Discuss the causes and fixes for P0712 Audi OBDII Code
Code P0712 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.