Engine-CodesToyota – P0705 2011 Toyota Camry

P0705 2011 Toyota Camry Code - Transmission Range Sensor Malfunction

Quick Answer

The P0705 diagnostic trouble code (DTC) for a 2011 Toyota Camry indicates a malfunction in the transmission range sensor. Common causes include Faulty transmission range sensor, Damaged or corroded wiring/connectors related to the sensor, Issues with the gear shift lever mechanism. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0705 2011 Toyota Camry indicates Transmission Range Sensor Malfunction.
Common causes
Common causes include Faulty transmission range sensor, Damaged or corroded wiring/connectors related to the sensor, Issues with the gear shift lever mechanism.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0705 2011 Toyota Camry Description

The P0705 diagnostic trouble code (DTC) for a 2011 Toyota Camry indicates a malfunction in the transmission range sensor. The transmission range sensor, also known as the neutral safety switch, is a crucial component of the vehicle's transmission system. It is responsible for detecting the position of the gear shift lever and informing the engine control module (ECM) about the gear selection. This information is essential for the ECM to adjust various parameters such as fuel injection, ignition timing, and transmission shifting points.

OBDII Code P0705 2011 Toyota Camry - Transmission Range Sensor Malfunction
P0705 2011 Toyota Camry Code - Transmission Range Sensor Malfunction

Common Causes of P0705 2011 Toyota Camry

  1. Faulty transmission range sensor
  2. Damaged or corroded wiring/connectors related to the sensor
  3. Issues with the gear shift lever mechanism
  4. ECM software or hardware issues
  5. Transmission fluid contamination or low fluid levels affecting sensor operation

Symptoms of P0705 2011 Toyota Camry

  1. Harsh or delayed shifting of the transmission
  2. Inability to shift gears or stuck in a particular gear
  3. Difficulty starting the vehicle
  4. Illumination of the Check Engine Light
  5. Loss of power or acceleration issues

How to Fix P0705 2011 Toyota Camry

  1. Diagnose the issue by using a scan tool to retrieve the DTC and inspecting the transmission range sensor and related components.
  2. Replace the faulty transmission range sensor if it is determined to be the cause of the malfunction.
  3. Check and repair any damaged wiring or connectors associated with the sensor.
  4. Reset the ECM and perform a relearn procedure to ensure proper communication with the new sensor.
  5. Test drive the vehicle to confirm that the issue has been resolved and that the transmission is functioning correctly.

Cost to Fix P0705 2011 Toyota Camry

The typical repair costs for a transmission range sensor malfunction on a 2011 Toyota Camry can range from $150 to $400, including parts and labor. However, it is essential to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships. Independent shops often offer lower labor rates. It is advisable to check local rates for a more accurate estimate of the repair costs.

When is the Code Detected?

The transmission range switch detects the selector lever position and sends a signal to the TCM.

Need more information about the P0705 2011 Toyota Camry code?

Need more information on how to fix the P0705 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0705 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0705 2011 Toyota Camry Code

1. What does the OBDII code P0705 mean on a 2011 Toyota Camry?

P0705 indicates a Transmission Range Sensor Circuit Malfunction, meaning the sensor is not correctly sending data about the transmission's gear position to the engine control module (ECM).

2. What are the common symptoms of a P0705 code?

Symptoms may include the car being stuck in one gear, difficulty shifting, the reverse lights not working, the transmission going into limp mode, and the check engine light turning on.

3. What causes a P0705 code in a 2011 Toyota Camry?

Common causes include a faulty transmission range sensor, damaged wiring or connectors, misaligned sensor installation, or a malfunction in the ECM.

4. Can I drive my 2011 Toyota Camry with the P0705 code?

Driving with a P0705 code is not recommended as it may cause further damage to the transmission and result in unsafe driving conditions.

5. How do I fix the P0705 code on my Toyota Camry?

Repairs may involve replacing the transmission range sensor, repairing damaged wiring or connectors, or adjusting the sensor alignment. A professional diagnosis is recommended.

6. How much does it cost to repair the P0705 code on a 2011 Toyota Camry?

The repair cost can range from $150 to $400, depending on whether the sensor, wiring, or other components need replacement and labor costs.

7. Where is the transmission range sensor located on a 2011 Toyota Camry?

The transmission range sensor is typically located on the outside of the transmission housing, near the shift linkage.

8. Can a bad transmission range sensor damage the transmission?

Yes, if the sensor is faulty, it can cause improper gear engagement, resulting in increased wear and potential damage to the transmission over time.

9. Do I need to reprogram the ECM after replacing the transmission range sensor?

In most cases, reprogramming is not needed, but it's recommended to clear the code and test the system with a scan tool after repairs.

10. How can I prevent the P0705 code from recurring?

Regular maintenance, such as inspecting wiring and connectors and ensuring the transmission range sensor is properly aligned, can help prevent this code from returning.

Discuss the causes and fixes for P0705 2011 Toyota Camry OBDII Code

Code P0705 2011 Toyota Camry comments

No comments found for this page.