P0705 2009 Ford Fusion Code - Transmission Range Sensor Out of Position
Quick Answer
The P0705 diagnostic trouble code (DTC) on a 2009 Ford Fusion indicates that the transmission range sensor is out of position. Common causes include Physical damage to the transmission range sensor, Electrical issues such as wiring damage or corrosion, Incorrect installation of the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2009 Ford Fusion indicates Transmission Range Sensor Out of Position.
- Common causes
- Common causes include Physical damage to the transmission range sensor, Electrical issues such as wiring damage or corrosion, Incorrect installation of the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0705 2009 Ford Fusion Description
The P0705 diagnostic trouble code (DTC) on a 2009 Ford Fusion indicates that the transmission range sensor is out of position. The transmission range sensor, also known as the neutral safety switch, is responsible for determining the gear position of the transmission. It sends signals to the vehicle's engine control module (ECM) to ensure that the correct gear is engaged. When the transmission range sensor is out of position, it can lead to inaccurate readings being sent to the ECM, resulting in various issues with the vehicle's transmission system.
Common Causes of P0705 2009 Ford Fusion
- Physical damage to the transmission range sensor
- Electrical issues such as wiring damage or corrosion
- Incorrect installation of the sensor
- Faulty transmission range sensor
- Issues with the vehicle's ECM
Symptoms of P0705 2009 Ford Fusion
- Difficulty starting the vehicle
- Inaccurate gear readings on the dashboard
- Erratic shifting or failure to shift gears
- Vehicle getting stuck in a particular gear
- Transmission slipping or jerking during acceleration
How to Fix P0705 2009 Ford Fusion
- Diagnose the issue by using a scan tool to confirm the P0705 code and inspecting the transmission range sensor for any physical damage or misalignment.
- Replace the transmission range sensor if it is found to be faulty or damaged.
- Check and repair any wiring or electrical issues that may be affecting the sensor's operation.
- Reset the ECM to clear the code and test drive the vehicle to ensure that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the transmission system.
Cost to Fix P0705 2009 Ford Fusion
The typical repair costs for addressing a P0705 code on a 2009 Ford Fusion can range from $200 to $500, including parts and labor. However, it is essential to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is recommended to inquire about local rates for a more accurate estimate.
When is the Code Detected?
Need more information about the P0705 2009 Ford Fusion code?
Need more information on how to fix the P0705 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0705 in a 2009 Ford Fusion?
- Common symptoms include difficulty shifting gears, the transmission not engaging, and the vehicle not starting.
2. What does the OBDII code P0705 indicate in a 2009 Ford Fusion?
- This code indicates a malfunction in the Transmission Range Sensor (also known as the Neutral Safety Switch) being out of position.
3. What are the possible causes of the Transmission Range Sensor being out of position in a 2009 Ford Fusion?
- The sensor may be out of position due to a faulty sensor, misalignment during installation, damaged wiring, or corrosion.
4. How can the Transmission Range Sensor issue be diagnosed in a 2009 Ford Fusion?
- A professional mechanic can use a scan tool to read the OBDII code, inspect the sensor and its wiring for damage, and perform a sensor position test.
5. Can I drive my 2009 Ford Fusion with the Transmission Range Sensor out of position?
- It is not recommended to drive the vehicle with this issue as it may lead to further transmission damage or safety hazards.
6. What are the repair options for fixing the Transmission Range Sensor problem in a 2009 Ford Fusion?
- Repair options include repositioning the sensor, repairing or replacing damaged wiring, or replacing the sensor altogether if it is faulty.
7. How much does it typically cost to repair the Transmission Range Sensor issue in a 2009 Ford Fusion?
- The cost of repair can vary depending on the extent of the issue, but it may range from $150 to $400, including parts and labor.
8. Can I reset the OBDII code P0705 in my 2009 Ford Fusion by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is recommended to address the underlying issue causing the code to prevent it from reoccurring.
9. Is the Transmission Range Sensor a common problem in 2009 Ford Fusion vehicles?
- Yes, the Transmission Range Sensor issue is a known problem in some 2009 Ford Fusion models, particularly as they age and accumulate mileage.
10. How important is it to address the Transmission Range Sensor problem in a 2009 Ford Fusion promptly?
- It is crucial to address the issue promptly to ensure safe and reliable operation of the vehicle's transmission system and to prevent potential further damage.
Discuss the causes and fixes for P0705 2009 Ford Fusion OBDII Code
Code P0705 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.