P0705 2008 Ford Fusion Code - Transmission Range Sensor Out of Position
Quick Answer
The P0705 diagnostic trouble code (DTC) for a 2008 Ford Fusion indicates that the Transmission Range Sensor (TRS) is out of position. Common causes include Misalignment of the transmission range sensor, Faulty transmission range sensor, Wiring or connector issues in the TRS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2008 Ford Fusion indicates Transmission Range Sensor Out of Position.
- Common causes
- Common causes include Misalignment of the transmission range sensor, Faulty transmission range sensor, Wiring or connector issues in the TRS circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0705 2008 Ford Fusion Description
The P0705 diagnostic trouble code (DTC) for a 2008 Ford Fusion indicates that the Transmission Range Sensor (TRS) is out of position. The TRS, also known as the Neutral Safety Switch, is a crucial component of the vehicle's transmission system. It is responsible for detecting the gear position (Park, Reverse, Neutral, Drive, etc.) selected by the driver and sending this information to the vehicle's Engine Control Module (ECM). When the TRS is out of position, it can lead to incorrect gear selection, erratic shifting, and potential safety hazards.
Common Causes of P0705 2008 Ford Fusion
- Misalignment of the transmission range sensor
- Faulty transmission range sensor
- Wiring or connector issues in the TRS circuit
- Corrosion or debris affecting TRS operation
- ECM software or hardware issues related to TRS signal interpretation
Symptoms of P0705 2008 Ford Fusion
- Check Engine Light illuminated
- Harsh shifting or erratic transmission behavior
- Delayed engagement when shifting gears
- Inability to start the vehicle
- Transmission stuck in one gear
How to Fix P0705 2008 Ford Fusion
- Begin by diagnosing the exact cause of the P0705 code using a scan tool to retrieve specific transmission range sensor data.
- Inspect the TRS for any physical damage, misalignment, or corrosion. Adjust or replace the sensor as needed.
- Check the wiring harness and connectors for any signs of damage or loose connections. Repair or replace any faulty wiring.
- Clear the DTC from the ECM memory and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to pinpoint the exact cause of the TRS malfunction.
Cost to Fix P0705 2008 Ford Fusion
The typical repair costs for addressing a P0705 code on a 2008 Ford Fusion can vary depending on the specific cause of the issue. In general, replacing a transmission range sensor can cost between $100 and $300, including parts and labor. However, additional diagnostic time and labor charges may apply, with total repair costs potentially ranging from $200 to $500. It is advisable to consult with a trusted mechanic or dealership to obtain a more accurate estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates can vary significantly based on location and service provider.
When is the Code Detected?
Need more information about the P0705 2008 Ford Fusion code?
Need more information on how to fix the P0705 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2008 Ford Fusion Code
1. What does the OBDII code P0705 mean on a 2008 Ford Fusion?
P0705 indicates a "Transmission Range Sensor Circuit Malfunction (PRNDL Input)," meaning the transmission range sensor is out of position or not functioning correctly.
2. What are the common symptoms of a P0705 code on a 2008 Ford Fusion?
Symptoms may include the inability to shift gears properly, the vehicle starting in the wrong gear, erratic shifting, the transmission being stuck in one gear, or the check engine light being illuminated.
3. What causes the P0705 code to appear on a 2008 Ford Fusion?
Common causes include a faulty transmission range sensor (TRS), damaged wiring or connectors in the TRS circuit, misaligned gear linkage, or internal transmission issues.
4. Can I drive my 2008 Ford Fusion with a P0705 code?
It’s not recommended to drive with this code, as it can cause shifting issues that may lead to poor drivability or transmission damage.
5. How do I diagnose the P0705 code on a 2008 Ford Fusion?
Start by inspecting the transmission range sensor and its wiring for damage or corrosion. Use a scan tool to monitor the sensor's output and verify proper alignment with the gear selector.
6. How much does it cost to fix the P0705 code on a 2008 Ford Fusion?
Repair costs vary but typically range from $150 to $400, depending on whether the sensor needs replacement or if additional repairs, such as wiring fixes, are required.
7. What tools are needed to repair the P0705 code on a 2008 Ford Fusion?
You’ll need a scan tool or OBDII reader, a multimeter to test wiring, basic hand tools, and possibly a service manual to ensure proper sensor alignment.
8. Can a P0705 code cause the transmission to go into limp mode?
Yes, a P0705 code can trigger the transmission to enter limp mode to protect itself from further damage, limiting vehicle performance.
9. Is the P0705 code specific to Ford vehicles?
No, P0705 is a generic OBDII code that can appear in many vehicles, but the diagnostic and repair steps may vary between manufacturers.
10. How can I prevent the P0705 code from recurring on my 2008 Ford Fusion?
Regularly inspect and maintain the transmission system, ensure the gear linkage is properly adjusted, and promptly repair any damaged wiring or components.
Discuss the causes and fixes for P0705 2008 Ford Fusion OBDII Code
Code P0705 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.