P0703 2020 Honda CR-V Code - Brake Pedal Position Switch Malfunction
Quick Answer
The P0703 code on a 2020 Honda CR-V indicates a malfunction in the brake pedal position switch. Common causes include Faulty brake pedal position switch, Wiring issues or shorts in the brake pedal position switch circuit, Corrosion or dirt buildup affecting the switch's functionality. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0703 2020 Honda CR-V indicates Brake Pedal Position Switch Malfunction.
- Common causes
- Common causes include Faulty brake pedal position switch, Wiring issues or shorts in the brake pedal position switch circuit, Corrosion or dirt buildup affecting the switch's functionality.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0703 2020 Honda CR-V Description
The P0703 code on a 2020 Honda CR-V indicates a malfunction in the brake pedal position switch. This switch is a critical component of the vehicle's braking system, as it is responsible for detecting when the brake pedal is pressed. When the switch malfunctions, it can lead to a variety of issues that can affect the vehicle's performance and safety.
Common Causes of P0703 2020 Honda CR-V
- Faulty brake pedal position switch
- Wiring issues or shorts in the brake pedal position switch circuit
- Corrosion or dirt buildup affecting the switch's functionality
- Issues with the brake pedal itself, such as being stuck or misaligned
Symptoms of P0703 2020 Honda CR-V
- Brake lights staying on constantly
- Brake lights not coming on when the brake pedal is pressed
- Difficulty shifting gears
- Check Engine Light illuminated on the dashboard
How to Fix P0703 2020 Honda CR-V
- Begin by locating the brake pedal position switch, which is typically located near the brake pedal assembly.
- Disconnect the electrical connector from the switch and remove any mounting screws holding it in place.
- Install the new brake pedal position switch in the correct position and secure it with mounting screws.
- Reconnect the electrical connector to the new switch.
- Test the switch by pressing the brake pedal and ensuring that the brake lights come on and off as expected.
Cost to Fix P0703 2020 Honda CR-V
The cost of repairing a brake pedal position switch malfunction can vary depending on the specific issue and the labor rates in your area. On average, the cost of parts for this repair can range from $50 to $150, with labor costs adding an additional $80 to $150 per hour. In total, the repair for a P0703 code on a 2020 Honda CR-V could range from $150 to $400. It's recommended to contact local auto repair shops for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P0703 2020 Honda CR-V code?
Need more information on how to fix the P0703 2020 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0703 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0703 2020 Honda CR-V Code
What does OBD-II code P0703 mean on a 2020 Honda CR-V?
Code P0703 indicates a "Brake Pedal Position Switch Malfunction," meaning the vehicle's computer has detected an issue with the brake pedal position switch or its circuit.
What are the common symptoms of P0703 on a 2020 Honda CR-V?
Symptoms may include the brake lights not working properly, inability to shift out of park, erratic transmission behavior, or the illumination of the check engine light.
What causes code P0703 on a 2020 Honda CR-V?
Common causes include a faulty brake pedal position switch, damaged or corroded wiring, poor electrical connections, or issues with the vehicle's PCM (Powertrain Control Module).
Can code P0703 lead to transmission problems in a 2020 Honda CR-V?
Yes, since the brake pedal position switch is linked to the transmission interlock system, a malfunction can prevent shifting out of park or cause erratic transmission behavior.
How do you diagnose a P0703 code on a 2020 Honda CR-V?
Diagnosis involves inspecting the brake pedal position switch, checking for damaged wiring or loose connections, and testing the switch with a multimeter to ensure proper operation.
Can I drive my 2020 Honda CR-V with a P0703 code?
Driving with a P0703 code is not recommended, as it can impact the brake lights or the safety interlock system, potentially creating safety hazards.
How do you fix a P0703 code on a 2020 Honda CR-V?
Common repairs include replacing the brake pedal position switch, repairing damaged wiring, cleaning corroded connectors, or reprogramming the PCM if necessary.
How much does it cost to repair a P0703 code on a 2020 Honda CR-V?
Repair costs can vary but typically range from $50 to $200, depending on whether the brake pedal position switch or wiring needs repair or replacement.
Can a dead battery cause a P0703 code on a 2020 Honda CR-V?
While unlikely, a dead or weak battery can sometimes cause electrical issues that trigger false codes, including P0703. Consider testing the battery and charging system.
Will resetting the check engine light fix a P0703 code on a 2020 Honda CR-V?
Resetting the check engine light may clear the code temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0703 2020 Honda CR-V OBDII Code
Code P0703 2020 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.