P0703 2007 Ford Fusion Code - Brake Switch Performance
Quick Answer
The P0703 code for a 2007 Ford Fusion indicates an issue with the brake switch performance. Common causes include Faulty brake switch, Loose or damaged wiring connected to the brake switch, Corrosion or dirt buildup affecting the brake switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0703 2007 Ford Fusion indicates Brake Switch Performance.
- Common causes
- Common causes include Faulty brake switch, Loose or damaged wiring connected to the brake switch, Corrosion or dirt buildup affecting the brake switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0703 2007 Ford Fusion Description
The P0703 code for a 2007 Ford Fusion indicates an issue with the brake switch performance. The brake switch, also known as the stoplight switch, is a crucial component of the vehicle's braking system. It is responsible for activating the brake lights when the brake pedal is pressed, as well as sending a signal to the vehicle's engine control module to disengage the cruise control system.
Common Causes of P0703 2007 Ford Fusion
- Faulty brake switch.
- Loose or damaged wiring connected to the brake switch.
- Corrosion or dirt buildup affecting the brake switch.
- Issues with the brake pedal position sensor.
- Electrical issues within the vehicle's wiring system.
Symptoms of P0703 2007 Ford Fusion
- Brake lights not illuminating when the brake pedal is pressed.
- Cruise control not disengaging when the brake pedal is pressed.
- Inability to shift out of park.
- Check engine light illuminated on the dashboard.
How to Fix P0703 2007 Ford Fusion
- Begin by locating the brake switch, typically located near the top of the brake pedal arm.
- Disconnect the wiring harness connected to the brake switch.
- Remove the old brake switch and install a new one in its place.
- Reconnect the wiring harness to the new brake switch.
- Test the brake lights and cruise control system to ensure proper functionality.
Cost to Fix P0703 2007 Ford Fusion
The cost of repairing a P0703 code for a 2007 Ford Fusion can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $50 to $150 for a new brake switch, plus additional costs for labor. Overall, the total repair cost could range from $100 to $300. Keep in mind that diagnostic time and labor rates can vary, so it's best to check with local auto repair shops for a more accurate estimate.
Tech Notes for P0703 2007 Ford Fusion
Need more information about the P0703 2007 Ford Fusion code?
Need more information on how to fix the P0703 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0703 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0703 2007 Ford Fusion Code
What does the OBDII code P0703 mean for a 2007 Ford Fusion?
The P0703 code indicates an issue with the brake switch performance, which may affect communication between the brake pedal and the vehicle's systems.
What are the common symptoms of code P0703 in a 2007 Ford Fusion?
Symptoms may include difficulty shifting gears, the brake lights not functioning, or the cruise control failing to engage.
What causes the P0703 code to appear in a 2007 Ford Fusion?
Common causes include a faulty brake switch, damaged wiring or connectors, or issues with the brake pedal’s alignment.
Can code P0703 affect drivability in a 2007 Ford Fusion?
Yes, it can lead to problems with gear shifting and cruise control operation, impacting overall drivability.
How can I diagnose code P0703 in a 2007 Ford Fusion?
Inspect the brake switch, wiring, and connectors for damage or wear. Use a multimeter to test the switch for proper function.
Is it safe to drive a 2007 Ford Fusion with code P0703?
Driving may be possible, but safety features like brake lights and cruise control may not function correctly, increasing the risk of accidents.
How do I fix the P0703 code on a 2007 Ford Fusion?
Common fixes include replacing the brake switch, repairing damaged wiring, or ensuring proper alignment of the brake pedal.
What tools do I need to repair code P0703 on a 2007 Ford Fusion?
You’ll typically need a multimeter, basic hand tools, and possibly an OBDII scanner to troubleshoot and clear the code.
Will replacing the brake switch clear the P0703 code on a 2007 Ford Fusion?
If the brake switch was the root cause, replacing it and clearing the code with an OBDII scanner should resolve the issue.
Can code P0703 trigger other warning lights on a 2007 Ford Fusion?
Yes, it may cause the check engine light to illuminate and could potentially affect other systems like ABS or traction control.
Discuss the causes and fixes for P0703 2007 Ford Fusion OBDII Code
Code P0703 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.