P0700 2016 GMC Sierra Code - Transmission Control Module Requested MIL Illumination
Quick Answer
The P0700 code in a 2016 GMC Sierra indicates an issue with the Transmission Control Module (TCM) requesting the Malfunction Indicator Lamp (MIL) to illuminate. Common causes include Faulty transmission sensors, Malfunctioning solenoids, Low transmission fluid level or contaminated fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0700 2016 GMC Sierra indicates Transmission Control Module Requested MIL Illumination.
- Common causes
- Common causes include Faulty transmission sensors, Malfunctioning solenoids, Low transmission fluid level or contaminated fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0700 2016 GMC Sierra Description
The P0700 code in a 2016 GMC Sierra indicates an issue with the Transmission Control Module (TCM) requesting the Malfunction Indicator Lamp (MIL) to illuminate. The TCM is responsible for controlling various aspects of the transmission system, such as shift points, torque converter lockup, and gear selection. When the TCM detects a problem within the transmission system, it sends a signal to the Engine Control Module (ECM) to turn on the MIL to alert the driver of a potential issue.
Common Causes of P0700 2016 GMC Sierra
- Faulty transmission sensors
- Malfunctioning solenoids
- Low transmission fluid level or contaminated fluid
- Wiring or connector issues in the transmission system
- Mechanical problems within the transmission, such as worn clutches or gears
Symptoms of P0700 2016 GMC Sierra
- Harsh shifting between gears
- Delayed or erratic gear changes
- Transmission slipping
- Reduced fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0700 2016 GMC Sierra
- Retrieve and record specific fault codes from the TCM using a diagnostic scanner.
- Inspect transmission sensors, solenoids, wiring, and connectors for any signs of damage or malfunction.
- Check transmission fluid level and condition, top up or replace as needed.
- Clear all fault codes from the TCM and reset the MIL, then test drive the vehicle to monitor for recurrence of the P0700 code.
- If the code persists, further diagnosis may be required to identify and address the specific underlying issue within the transmission system.
Cost to Fix P0700 2016 GMC Sierra
The cost of repairing the P0700 code in a 2016 GMC Sierra can vary depending on the specific cause of the issue. On average, the repair costs for this type of transmission-related problem can range from $200 to $800, including parts and labor. However, the final cost may be higher if more extensive repairs or component replacements are necessary. It's recommended to consult with a professional mechanic or dealership to get an accurate estimate based on the specific diagnosis and repair required for your vehicle. Keep in mind that labor rates and part prices can vary between different repair shops and locations.
Tech Notes for P0700 2016 GMC Sierra
Need more information about the P0700 2016 GMC Sierra code?
Need more information on how to fix the P0700 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0700 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0700 2016 GMC Sierra Code
What does the OBDII code P0700 mean for a 2016 GMC Sierra?
P0700 indicates that the Transmission Control Module (TCM) has detected a transmission issue and requested the Malfunction Indicator Light (MIL) to be illuminated.
What are common symptoms of code P0700 in a 2016 GMC Sierra?
Symptoms may include a check engine light, erratic shifting, transmission slipping, reduced engine performance, or the vehicle entering "limp mode."
What causes the P0700 code in a GMC Sierra?
Common causes include a malfunctioning TCM, transmission solenoid issues, wiring problems, or internal transmission failures.
Can I still drive my GMC Sierra with the P0700 code?
While the vehicle may still be drivable, it’s not recommended as continued driving can worsen transmission issues and lead to costly repairs.
How is the P0700 code diagnosed?
A mechanic will use a diagnostic scanner to retrieve additional transmission-related codes from the TCM, inspect wiring and connectors, and test transmission components for faults.
Does the P0700 code mean the Transmission Control Module is bad?
Not necessarily. P0700 indicates a transmission issue, but the specific cause could range from a wiring fault to a mechanical problem within the transmission.
How much does it cost to fix code P0700 on a 2016 GMC Sierra?
Repair costs can vary widely depending on the underlying issue, ranging from $100 for simple wiring repairs to $1,000+ for major transmission work.
Can a software update fix the P0700 code on a GMC Sierra?
In some cases, a software update or reprogramming of the TCM can resolve the issue if the problem is related to outdated firmware or incorrect calibration.
What tools are needed to diagnose P0700 on a 2016 GMC Sierra?
A professional-grade OBDII scanner capable of accessing TCM codes and live transmission data is essential for proper diagnosis.
How do I prevent the P0700 code from appearing in the future?
Regular transmission maintenance, such as fluid changes and inspections, can help prevent issues that trigger the P0700 code.
Discuss the causes and fixes for P0700 2016 GMC Sierra OBDII Code
Code P0700 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.