P06C7 2018 GMC Sierra Code - Cylinder 3 Glow Plug Incorrect
Quick Answer
The P06C7 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically indicates that there is an issue with the glow plug in cylinder 3 of the engine. Common causes include Faulty glow plug in cylinder 3, Wiring or connection issues in the glow plug circuit, ECM malfunction or programming error. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06C7 2018 GMC Sierra indicates Cylinder 3 Glow Plug Incorrect.
- Common causes
- Common causes include Faulty glow plug in cylinder 3, Wiring or connection issues in the glow plug circuit, ECM malfunction or programming error.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P06C7 2018 GMC Sierra Description
The P06C7 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically indicates that there is an issue with the glow plug in cylinder 3 of the engine. Glow plugs are a component of diesel engines that help warm up the combustion chamber for easier starting, especially in cold weather. When the glow plug in cylinder 3 is determined to be incorrect, it means that the engine control module (ECM) has detected a discrepancy in the glow plug's performance or signal.
Common Causes of P06C7 2018 GMC Sierra
- Faulty glow plug in cylinder 3
- Wiring or connection issues in the glow plug circuit
- ECM malfunction or programming error
- Corrosion or carbon buildup on the glow plug
Symptoms of P06C7 2018 GMC Sierra
- Difficulty starting the engine, especially in cold weather
- Rough idling or misfires
- Decreased engine performance
- Increased emissions
- Illumination of the check engine light
How to Fix P06C7 2018 GMC Sierra
- Use a diagnostic scanner to read the DTC and confirm the issue with the glow plug in cylinder 3.
- Inspect the wiring and connections in the glow plug circuit for any damage or corrosion.
- Test the resistance of the glow plug to determine if it is functioning correctly.
- Replace the faulty glow plug in cylinder 3 if necessary.
- Clear the DTC and test the vehicle to ensure the issue has been resolved.
Cost to Fix P06C7 2018 GMC Sierra
The typical repair costs for addressing a cylinder 3 glow plug incorrect issue can vary depending on the specific cause of the problem and the labor rates in your location. Generally, replacing a glow plug in cylinder 3 can cost between $100 to $200 for parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P06C7 2018 GMC Sierra code?
Need more information on how to fix the P06C7 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06C7 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06C7 2018 GMC Sierra Code
What does the OBDII code P06C7 mean for a 2018 GMC Sierra?
P06C7 indicates that the cylinder 3 glow plug is not functioning correctly, likely due to a circuit or component failure.
What are the symptoms of code P06C7 on a GMC Sierra?
Common symptoms include difficulty starting the engine in cold weather, rough idling, and the check engine light being illuminated.
What causes the P06C7 code to appear?
Causes may include a faulty glow plug, wiring issues, a damaged glow plug control module, or corroded electrical connections.
Can I drive my GMC Sierra with the P06C7 code?
While the vehicle may still drive, starting issues or engine performance problems in cold weather can worsen if the issue isn't repaired.
How can I diagnose the P06C7 code?
Check the cylinder 3 glow plug for damage, inspect wiring and connectors for corrosion or breaks, and test the glow plug control module for proper operation.
What tools are needed to fix the P06C7 code?
You may need a multimeter, OBDII scanner, and basic hand tools to test and replace the faulty glow plug or repair wiring issues.
How do I replace a faulty glow plug on a 2018 GMC Sierra?
Disconnect the battery, remove the faulty glow plug from cylinder 3 using the appropriate socket, and install a new glow plug securely.
What is the cost to repair the P06C7 code?
Replacing a glow plug typically costs $50-$150 for parts, and labor may add $50-$200 depending on the shop.
Can a P06C7 code affect fuel efficiency?
Yes, a malfunctioning glow plug can cause incomplete combustion, which may slightly reduce fuel efficiency.
How do I prevent the P06C7 code from recurring?
Regularly inspect and maintain the glow plug system, checking for corrosion, damaged wiring, or wear on components.
Discuss the causes and fixes for P06C7 2018 GMC Sierra OBDII Code
Code P06C7 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.