P06B1 2018 GMC Sierra Code - Sensor Supply Voltage Circuit Low Voltage
Quick Answer
The P06B1 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a Sensor Supply Voltage Circuit Low Voltage. Common causes include Faulty sensor, Wiring or connection issues in the sensor circuit, Corrosion or damage to sensor connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P06B1 2018 GMC Sierra indicates Sensor Supply Voltage Circuit Low Voltage.
- Common causes
- Common causes include Faulty sensor, Wiring or connection issues in the sensor circuit, Corrosion or damage to sensor connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P06B1 2018 GMC Sierra Description
The P06B1 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates a Sensor Supply Voltage Circuit Low Voltage. This code is triggered when the power supply to a sensor in the vehicle's system is below the expected voltage range. Sensors in modern vehicles play a crucial role in monitoring various parameters and sending signals to the engine control module (ECM) for optimal performance. When the voltage supply to a sensor is low, it can lead to inaccurate readings and affect the vehicle's overall performance.
Common Causes of P06B1 2018 GMC Sierra
- Faulty sensor
- Wiring or connection issues in the sensor circuit
- Corrosion or damage to sensor connectors
- ECM malfunction
- Low battery voltage affecting sensor supply
Symptoms of P06B1 2018 GMC Sierra
- Rough idling or engine misfires
- Reduced fuel efficiency
- Engine stalling or hesitation
- Check engine light illuminated
- Poor acceleration or overall performance
How to Fix P06B1 2018 GMC Sierra
- Begin by conducting a thorough inspection of the sensor and its wiring harness to check for any visible damage or corrosion.
- Test the sensor's voltage supply using a multimeter to determine if it falls below the specified range.
- If the voltage supply is low, check the wiring harness for any breaks or shorts and repair as necessary.
- Replace the sensor if it is found to be faulty or damaged beyond repair.
- Clear the DTC from the ECM's memory using a diagnostic scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P06B1 2018 GMC Sierra
The cost of repairing a Sensor Supply Voltage Circuit Low Voltage issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, replacing a sensor or repairing wiring issues can range from $100 to $300, including parts and labor. However, additional diagnostic time may be required to pinpoint the exact cause of the low voltage supply, which can add to the overall cost. It's recommended to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Labor rates typically range from $80 to $150 per hour, but can vary based on location and shop rates.
Need more information about the P06B1 2018 GMC Sierra code?
Need more information on how to fix the P06B1 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P06B1 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P06B1 2018 GMC Sierra Code
1. What does the OBDII code P06B1 mean on a 2018 GMC Sierra?
P06B1 indicates a "Sensor Supply Voltage Circuit Low Voltage," meaning the voltage supplied to certain sensors is lower than specified by the manufacturer.
2. What are the common symptoms of code P06B1 in a 2018 GMC Sierra?
Symptoms may include illuminated check engine light, reduced engine performance, hard starting, or erratic sensor readings.
3. What causes code P06B1 on a 2018 GMC Sierra?
Common causes include a faulty powertrain control module (PCM), wiring issues like shorts or corrosion, a defective sensor, or a weak battery.
4. Can a low battery cause the P06B1 code?
Yes, a weak or failing battery can cause low voltage in the sensor supply circuit, triggering the P06B1 code.
5. How do you diagnose the P06B1 code on a 2018 GMC Sierra?
Diagnosis involves checking for loose or damaged wiring, testing the battery and alternator, inspecting sensors for faults, and using a scan tool to monitor voltage levels.
6. Is it safe to drive a 2018 GMC Sierra with code P06B1?
Driving with this code is not recommended, as it may lead to poor engine performance or further damage to the vehicle's electrical system.
7. What sensors are affected by the P06B1 code on a 2018 GMC Sierra?
This code typically affects sensors that rely on a 5-volt reference signal, such as the throttle position sensor (TPS) or manifold absolute pressure (MAP) sensor.
8. How can I fix the P06B1 code on my 2018 GMC Sierra?
Repairs may include fixing or replacing damaged wiring, cleaning corroded connectors, replacing faulty sensors, or reprogramming or replacing the PCM.
9. Can the P06B1 code reset itself after repairs?
In some cases, the code may reset after repairs are made, but it’s recommended to clear the code manually with a scan tool and verify the fix.
10. How much does it cost to repair the P06B1 code on a 2018 GMC Sierra?
Repair costs vary depending on the cause but can range from $50 for minor wiring repairs to $500 or more for PCM replacement or sensor issues.
Discuss the causes and fixes for P06B1 2018 GMC Sierra OBDII Code
Code P06B1 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.