Engine-CodesGMC – P06A3 2017 GMC Sierra

P06A3 2017 GMC Sierra Code - 5 Volt Reference 4 Circuit

Quick Answer

The P06A3 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates a problem with the 5 Volt Reference 4 Circuit. Common causes include Short circuit in the wiring harness, Faulty throttle position sensor, Corrosion or poor connection at the sensor terminals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P06A3 2017 GMC Sierra indicates 5 Volt Reference 4 Circuit.
Common causes
Common causes include Short circuit in the wiring harness, Faulty throttle position sensor, Corrosion or poor connection at the sensor terminals.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P06A3 2017 GMC Sierra Description

The P06A3 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates a problem with the 5 Volt Reference 4 Circuit. In modern vehicles, the Engine Control Module (ECM) provides 5 volts to various sensors and components to ensure they function properly. The 5 Volt Reference 4 Circuit specifically supplies voltage to sensors such as the throttle position sensor, fuel tank pressure sensor, and more.

OBDII Code P06A3 2017 GMC Sierra - 5 Volt Reference 4 Circuit
P06A3 2017 GMC Sierra Code - 5 Volt Reference 4 Circuit

Common Causes of P06A3 2017 GMC Sierra

  1. Short circuit in the wiring harness
  2. Faulty throttle position sensor
  3. Corrosion or poor connection at the sensor terminals
  4. ECM malfunction
  5. Water intrusion into the sensor connectors

Symptoms of P06A3 2017 GMC Sierra

  1. Engine stalling or rough idling
  2. Reduced fuel efficiency
  3. Check Engine Light illuminated
  4. Loss of power during acceleration
  5. Inaccurate gauge readings

How to Fix P06A3 2017 GMC Sierra

  1. Begin by conducting a thorough visual inspection of the wiring harness and sensor connectors to check for any visible damage, corrosion, or loose connections.
  2. Use a multimeter to test the voltage output of the 5 Volt Reference 4 Circuit at various points to pinpoint the location of the fault.
  3. Test the sensors connected to the circuit, such as the throttle position sensor, to determine if they are functioning correctly.
  4. Replace any damaged wiring, connectors, or sensors as needed.
  5. Clear the DTC from the ECM memory and perform a test drive to ensure the issue has been resolved.

Cost to Fix P06A3 2017 GMC Sierra

The typical repair costs for addressing a P06A3 code can vary depending on the specific cause of the issue. In general, parts such as sensors or wiring harnesses may range from $50 to $200, while labor costs can add another $100 to $300. Overall, the total repair cost may fall between $150 and $500. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to obtain quotes from local shops for a more accurate estimate.

Tech Notes for P06A3 2017 GMC Sierra

Disconnecting one component at a time from the affected 5 Volt reference circuit while observing the scan tool 5 Volt Reference Circuit Status parameter may help locate the fault. The scan tool parameter will change from Malfunction to OK when the source of the fault is disconnected. If all 5 Volt reference components have been disconnected and a fault is still indicated, the fault may exist in the wiring harness.



The 5 Volt reference 4 circuit provides 5 Volt to the following sensors: (Some models may have different sensors, please consult the factory service manual for the list of sensors for your model and year)



- Accelerator pedal position sensor 1

- Throttle position sensor

Need more information about the P06A3 2017 GMC Sierra code?

Need more information on how to fix the P06A3 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P06A3 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P06A3 2017 GMC Sierra Code

No Frequently Asked Questions about P06A3 2017 GMC Sierra Code found.

Discuss the causes and fixes for P06A3 2017 GMC Sierra OBDII Code

Code P06A3 2017 GMC Sierra comments

No comments found for this page.